Token PanicSwap

/**
 *Submitted for verification at Etherscan.io on 2022-02-02
*/

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/ERC20.sol)
// Website: Panicswap.com
// Telegram: @Panic_Swap
// Twitter: @Panic_Swap

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}


// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}


/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}


/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}



/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public virtual override returns (bool) {
        uint256 currentAllowance = _allowances[sender][_msgSender()];
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
            unchecked {
                _approve(sender, _msgSender(), currentAllowance - amount);
            }
        }

        _transfer(sender, recipient, amount);

        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        uint256 currentAllowance = _allowances[_msgSender()][spender];
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(_msgSender(), spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `sender` to `recipient`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        uint256 senderBalance = _balances[sender];
        require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[sender] = senderBalance - amount;
        }
        _balances[recipient] += amount;

        emit Transfer(sender, recipient, amount);

        _afterTokenTransfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
        }
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}


/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        uint256 currentAllowance = allowance(account, _msgSender());
        require(currentAllowance >= amount, "ERC20: burn amount exceeds allowance");
        unchecked {
            _approve(account, _msgSender(), currentAllowance - amount);
        }
        _burn(account, amount);
    }
}

/**
 * @dev Extension of {ERC20} that allows token to be minted. Useful for farming tokens
 */
 abstract contract ERC20Mintable is Ownable, ERC20 {
     mapping(address=>bool) public minter;

     function toggleMinter(address _address) external onlyOwner{
         minter[_address] = !minter[_address];
     }

     modifier onlyMinters{
        require(minter[msg.sender], "not minter");
         _;
     }

     function mint(address _address, uint _amount) public virtual onlyMinters{
         _mint(_address, _amount);
     }
 }

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}


/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}


// MasterChef is the master of Sushi. He can make Sushi and he is a fair guy.
//
// Note that it's ownable and the owner wields tremendous power. The ownership
// will be transferred to a governance smart contract once SUSHI is sufficiently
// distributed and the community can show to govern itself.
//
// Have fun reading it. Hopefully it's bug-free. God bless.
contract MasterChef is Ownable {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    // Info of each user.
    struct UserInfo {
        uint256 amount;     // How many LP tokens the user has provided.
        uint256 rewardDebt; // Reward debt. See explanation below.
        //
        // We do some fancy math here. Basically, any point in time, the amount of SUSHIs
        // entitled to a user but is pending to be distributed is:
        //
        //   pending reward = (user.amount * pool.accSushiPerShare) - user.rewardDebt
        //
        // Whenever a user deposits or withdraws LP tokens to a pool. Here's what happens:
        //   1. The pool's `accSushiPerShare` (and `lastRewardBlock`) gets updated.
        //   2. User receives the pending reward sent to his/her address.
        //   3. User's `amount` gets updated.
        //   4. User's `rewardDebt` gets updated.
    }

    // Info of each pool.
    struct PoolInfo {
        IERC20 lpToken;           // Address of LP token contract.
        uint256 allocPoint;       // How many allocation points assigned to this pool. SUSHIs to distribute per block.
        uint256 lastRewardBlock;  // Last block number that SUSHIs distribution occurs.
        uint256 accSushiPerShare; // Accumulated SUSHIs per share, times 1e12. See below.
    }

    // The SUSHI TOKEN!
    ERC20Mintable public sushi;
    // SUSHI tokens created per block.
    uint256 public sushiPerBlock;
    // Bonus muliplier for early sushi makers.
    uint256 public constant BONUS_MULTIPLIER = 1;
    // Rewards end
    uint256 public endBlock;

    // Info of each pool.
    PoolInfo[] public poolInfo;
    // Info of each user that stakes LP tokens.
    mapping (uint256 => mapping (address => UserInfo)) public userInfo;
    // Total allocation poitns. Must be the sum of all allocation points in all pools.
    uint256 public totalAllocPoint = 0;
    // The block number when SUSHI mining starts.
    uint256 public startBlock;

    event Deposit(address indexed user, uint256 indexed pid, uint256 amount);
    event Withdraw(address indexed user, uint256 indexed pid, uint256 amount);
    event EmergencyWithdraw(address indexed user, uint256 indexed pid, uint256 amount);

    constructor(
        ERC20Mintable _sushi,
        uint256 _sushiPerBlock,
        uint256 _startBlock,
        uint256 _endBlock
    ) {
        sushi = _sushi;
        sushiPerBlock = _sushiPerBlock;
        startBlock = _startBlock;
        endBlock = _endBlock;
    }

    function poolLength() external view returns (uint256) {
        return poolInfo.length;
    }

    // Add a new lp to the pool. Can only be called by the owner.
    // XXX DO NOT add the same LP token more than once. Rewards will be messed up if you do.
    function add(uint256 _allocPoint, IERC20 _lpToken, bool _withUpdate) public onlyOwner {
        if (_withUpdate) {
            massUpdatePools();
        }
        uint256 lastRewardBlock = block.number > startBlock ? block.number : startBlock;
        totalAllocPoint = totalAllocPoint.add(_allocPoint);
        poolInfo.push(PoolInfo({
            lpToken: _lpToken,
            allocPoint: _allocPoint,
            lastRewardBlock: lastRewardBlock,
            accSushiPerShare: 0
        }));
    }

    // Update the given pool's SUSHI allocation point. Can only be called by the owner.
    function set(uint256 _pid, uint256 _allocPoint, bool _withUpdate) public onlyOwner {
        if (_withUpdate) {
            massUpdatePools();
        }
        totalAllocPoint = totalAllocPoint.sub(poolInfo[_pid].allocPoint).add(_allocPoint);
        poolInfo[_pid].allocPoint = _allocPoint;
    }

    // Return reward multiplier over the given _from to _to block.
    function getMultiplier(uint256 _from, uint256 _to) public view returns (uint256) {
        if(_from > endBlock)
            return 0;
        if(_to < endBlock)
            return _to.sub(_from);
        return endBlock.sub(_from);
    }

    // View function to see pending SUSHIs on frontend.
    function pendingSushi(uint256 _pid, address _user) external view returns (uint256) {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][_user];
        uint256 accSushiPerShare = pool.accSushiPerShare;
        uint256 lpSupply = pool.lpToken.balanceOf(address(this));
        if (block.number > pool.lastRewardBlock && lpSupply != 0) {
            uint256 multiplier = getMultiplier(pool.lastRewardBlock, block.number);
            uint256 sushiReward = multiplier.mul(sushiPerBlock).mul(pool.allocPoint).div(totalAllocPoint);
            accSushiPerShare = accSushiPerShare.add(sushiReward.mul(1e12).div(lpSupply));
        }
        return user.amount.mul(accSushiPerShare).div(1e12).sub(user.rewardDebt);
    }

    // Update reward vairables for all pools. Be careful of gas spending!
    function massUpdatePools() public {
        uint256 length = poolInfo.length;
        for (uint256 pid = 0; pid < length; ++pid) {
            updatePool(pid);
        }
    }

    // Update reward variables of the given pool to be up-to-date.
    function updatePool(uint256 _pid) public {
        PoolInfo storage pool = poolInfo[_pid];
        if (block.number <= pool.lastRewardBlock) {
            return;
        }
        uint256 lpSupply = pool.lpToken.balanceOf(address(this));
        if (lpSupply == 0) {
            pool.lastRewardBlock = block.number;
            return;
        }
        uint256 multiplier = getMultiplier(pool.lastRewardBlock, block.number);
        uint256 sushiReward = multiplier.mul(sushiPerBlock).mul(pool.allocPoint).div(totalAllocPoint);
        sushi.mint(address(this), sushiReward);
        pool.accSushiPerShare = pool.accSushiPerShare.add(sushiReward.mul(1e12).div(lpSupply));
        pool.lastRewardBlock = block.number;
    }

    // Deposit LP tokens to MasterChef for SUSHI allocation.
    function deposit(uint256 _pid, uint256 _amount) public {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        updatePool(_pid);
        if (user.amount > 0) {
            uint256 pending = user.amount.mul(pool.accSushiPerShare).div(1e12).sub(user.rewardDebt);
            safeSushiTransfer(msg.sender, pending);
        }
        pool.lpToken.safeTransferFrom(address(msg.sender), address(this), _amount);
        user.amount = user.amount.add(_amount);
        user.rewardDebt = user.amount.mul(pool.accSushiPerShare).div(1e12);
        emit Deposit(msg.sender, _pid, _amount);
    }

    // Withdraw LP tokens from MasterChef.
    function withdraw(uint256 _pid, uint256 _amount) public {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        require(user.amount >= _amount, "withdraw: not good");
        updatePool(_pid);
        uint256 pending = user.amount.mul(pool.accSushiPerShare).div(1e12).sub(user.rewardDebt);
        safeSushiTransfer(msg.sender, pending);
        user.amount = user.amount.sub(_amount);
        user.rewardDebt = user.amount.mul(pool.accSushiPerShare).div(1e12);
        pool.lpToken.safeTransfer(address(msg.sender), _amount);
        emit Withdraw(msg.sender, _pid, _amount);
    }

    // Withdraw without caring about rewards. EMERGENCY ONLY.
    function emergencyWithdraw(uint256 _pid) public {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        pool.lpToken.safeTransfer(address(msg.sender), user.amount);
        emit EmergencyWithdraw(msg.sender, _pid, user.amount);
        user.amount = 0;
        user.rewardDebt = 0;
    }

    // Safe sushi transfer function, just in case if rounding error causes pool to not have enough SUSHIs.
    function safeSushiTransfer(address _to, uint256 _amount) internal {
        uint256 sushiBal = sushi.balanceOf(address(this));
        if (_amount > sushiBal) {
            sushi.transfer(_to, sushiBal);
        } else {
            sushi.transfer(_to, _amount);
        }
    }

}

 contract PanicSwap is ERC20("PanicSwap", "PANIC"), ERC20Mintable, ERC20Burnable {
     constructor(){
     }
 }



 contract PanicSwapFactory is Ownable{
    uint public timelock;
    uint public proposedDate;
    bytes[] public proposedData;
    address[] public proposedTarget;
    address public panicToken;
    address public classicChef;

    using Address for address;

    function propose(bytes[] memory _data, address[] memory _target) external onlyOwner{
        require(_data.length == _target.length);
        proposedDate = block.timestamp;
        proposedData = _data;
        proposedTarget = _target;
    }

    function execute() external onlyOwner{
        require(proposedDate + timelock < block.timestamp, "gotta wait");
        if(timelock == 0)
            timelock = 1 days;
        for(uint i; i<proposedData.length; i++)
            proposedTarget[i].functionCall(proposedData[i]);
        delete(proposedDate);
        delete(proposedData);
    }

    constructor(){
        panicToken = address(new PanicSwap());
        ERC20Mintable panicContract = ERC20Mintable(panicToken);
        classicChef = address(new MasterChef(panicContract, 1 ether, 30000000, 30960000));
        panicContract.toggleMinter(classicChef);
        require(Ownable(panicToken).owner() == address(this), "Don't mint");
        require(Ownable(classicChef).owner() == address(this), "Don't mint");
    }
 }

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burnFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_address","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"minter","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_address","type":"address"}],"name":"toggleMinter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"}]

60806040523480156200001157600080fd5b5060405180604001604052806009815260200168050616e6963537761760bc1b8152506040518060400160405280600581526020016450414e494360d81b8152506200006c62000066620000a060201b60201c565b620000a4565b815162000081906004906020850190620000f4565b50805162000097906005906020840190620000f4565b505050620001d7565b3390565b600080546001600160a01b038381166001600160a01b0319831681178455604051919092169283917f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e09190a35050565b82805462000102906200019a565b90600052602060002090601f01602090048101928262000126576000855562000171565b82601f106200014157805160ff191683800117855562000171565b8280016001018555821562000171579182015b828111156200017157825182559160200191906001019062000154565b506200017f92915062000183565b5090565b5b808211156200017f576000815560010162000184565b600181811c90821680620001af57607f821691505b60208210811415620001d157634e487b7160e01b600052602260045260246000fd5b50919050565b610ee280620001e76000396000f3fe608060405234801561001057600080fd5b50600436106101215760003560e01c806362f6c9d5116100ad57806395d89b411161007157806395d89b411461026b578063a457c2d714610273578063a9059cbb14610286578063dd62ed3e14610299578063f2fde38b146102d257600080fd5b806362f6c9d5146101f957806370a082311461020c578063715018a61461023557806379cc67901461023d5780638da5cb5b1461025057600080fd5b8063313ce567116100f4578063313ce5671461018c578063395093511461019b5780633dd08c38146101ae57806340c10f19146101d157806342966c68146101e657600080fd5b806306fdde0314610126578063095ea7b31461014457806318160ddd1461016757806323b872dd14610179575b600080fd5b61012e6102e5565b60405161013b9190610cb2565b60405180910390f35b610157610152366004610d23565b610377565b604051901515815260200161013b565b6003545b60405190815260200161013b565b610157610187366004610d4d565b61038d565b6040516012815260200161013b565b6101576101a9366004610d23565b610443565b6101576101bc366004610d89565b60066020526000908152604090205460ff1681565b6101e46101df366004610d23565b61047f565b005b6101e46101f4366004610dab565b6104d9565b6101e4610207366004610d89565b6104e6565b61016b61021a366004610d89565b6001600160a01b031660009081526001602052604090205490565b6101e4610539565b6101e461024b366004610d23565b61056f565b6000546040516001600160a01b03909116815260200161013b565b61012e6105f5565b610157610281366004610d23565b610604565b610157610294366004610d23565b61069d565b61016b6102a7366004610dc4565b6001600160a01b03918216600090815260026020908152604080832093909416825291909152205490565b6101e46102e0366004610d89565b6106aa565b6060600480546102f490610df7565b80601f016020809104026020016040519081016040528092919081815260200182805461032090610df7565b801561036d5780601f106103425761010080835404028352916020019161036d565b820191906000526020600020905b81548152906001019060200180831161035057829003601f168201915b5050505050905090565b6000610384338484610742565b50600192915050565b6001600160a01b0383166000908152600260209081526040808320338452909152812054600019811461042d57828110156104205760405162461bcd60e51b815260206004820152602860248201527f45524332303a207472616e7366657220616d6f756e74206578636565647320616044820152676c6c6f77616e636560c01b60648201526084015b60405180910390fd5b61042d8533858403610742565b610438858585610866565b506001949350505050565b3360008181526002602090815260408083206001600160a01b0387168452909152812054909161038491859061047a908690610e48565b610742565b3360009081526006602052604090205460ff166104cb5760405162461bcd60e51b815260206004820152600a6024820152693737ba1036b4b73a32b960b11b6044820152606401610417565b6104d58282610a35565b5050565b6104e33382610b14565b50565b6000546001600160a01b031633146105105760405162461bcd60e51b815260040161041790610e60565b6001600160a01b03166000908152600660205260409020805460ff19811660ff90911615179055565b6000546001600160a01b031633146105635760405162461bcd60e51b815260040161041790610e60565b61056d6000610c62565b565b600061057b83336102a7565b9050818110156105d95760405162461bcd60e51b8152602060048201526024808201527f45524332303a206275726e20616d6f756e74206578636565647320616c6c6f77604482015263616e636560e01b6064820152608401610417565b6105e68333848403610742565b6105f08383610b14565b505050565b6060600580546102f490610df7565b3360009081526002602090815260408083206001600160a01b0386168452909152812054828110156106865760405162461bcd60e51b815260206004820152602560248201527f45524332303a2064656372656173656420616c6c6f77616e63652062656c6f77604482015264207a65726f60d81b6064820152608401610417565b6106933385858403610742565b5060019392505050565b6000610384338484610866565b6000546001600160a01b031633146106d45760405162461bcd60e51b815260040161041790610e60565b6001600160a01b0381166107395760405162461bcd60e51b815260206004820152602660248201527f4f776e61626c653a206e6577206f776e657220697320746865207a65726f206160448201526564647265737360d01b6064820152608401610417565b6104e381610c62565b6001600160a01b0383166107a45760405162461bcd60e51b8152602060048201526024808201527f45524332303a20617070726f76652066726f6d20746865207a65726f206164646044820152637265737360e01b6064820152608401610417565b6001600160a01b0382166108055760405162461bcd60e51b815260206004820152602260248201527f45524332303a20617070726f766520746f20746865207a65726f206164647265604482015261737360f01b6064820152608401610417565b6001600160a01b0383811660008181526002602090815260408083209487168084529482529182902085905590518481527f8c5be1e5ebec7d5bd14f71427d1e84f3dd0314c0f7b2291e5b200ac8c7c3b925910160405180910390a3505050565b6001600160a01b0383166108ca5760405162461bcd60e51b815260206004820152602560248201527f45524332303a207472616e736665722066726f6d20746865207a65726f206164604482015264647265737360d81b6064820152608401610417565b6001600160a01b03821661092c5760405162461bcd60e51b815260206004820152602360248201527f45524332303a207472616e7366657220746f20746865207a65726f206164647260448201526265737360e81b6064820152608401610417565b6001600160a01b038316600090815260016020526040902054818110156109a45760405162461bcd60e51b815260206004820152602660248201527f45524332303a207472616e7366657220616d6f756e7420657863656564732062604482015265616c616e636560d01b6064820152608401610417565b6001600160a01b038085166000908152600160205260408082208585039055918516815290812080548492906109db908490610e48565b92505081905550826001600160a01b0316846001600160a01b03167fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef84604051610a2791815260200190565b60405180910390a350505050565b6001600160a01b038216610a8b5760405162461bcd60e51b815260206004820152601f60248201527f45524332303a206d696e7420746f20746865207a65726f2061646472657373006044820152606401610417565b8060036000828254610a9d9190610e48565b90915550506001600160a01b03821660009081526001602052604081208054839290610aca908490610e48565b90915550506040518181526001600160a01b038316906000907fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef9060200160405180910390a35050565b6001600160a01b038216610b745760405162461bcd60e51b815260206004820152602160248201527f45524332303a206275726e2066726f6d20746865207a65726f206164647265736044820152607360f81b6064820152608401610417565b6001600160a01b03821660009081526001602052604090205481811015610be85760405162461bcd60e51b815260206004820152602260248201527f45524332303a206275726e20616d6f756e7420657863656564732062616c616e604482015261636560f01b6064820152608401610417565b6001600160a01b0383166000908152600160205260408120838303905560038054849290610c17908490610e95565b90915550506040518281526000906001600160a01b038516907fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef9060200160405180910390a3505050565b600080546001600160a01b038381166001600160a01b0319831681178455604051919092169283917f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e09190a35050565b600060208083528351808285015260005b81811015610cdf57858101830151858201604001528201610cc3565b81811115610cf1576000604083870101525b50601f01601f1916929092016040019392505050565b80356001600160a01b0381168114610d1e57600080fd5b919050565b60008060408385031215610d3657600080fd5b610d3f83610d07565b946020939093013593505050565b600080600060608486031215610d6257600080fd5b610d6b84610d07565b9250610d7960208501610d07565b9150604084013590509250925092565b600060208284031215610d9b57600080fd5b610da482610d07565b9392505050565b600060208284031215610dbd57600080fd5b5035919050565b60008060408385031215610dd757600080fd5b610de083610d07565b9150610dee60208401610d07565b90509250929050565b600181811c90821680610e0b57607f821691505b60208210811415610e2c57634e487b7160e01b600052602260045260246000fd5b50919050565b634e487b7160e01b600052601160045260246000fd5b60008219821115610e5b57610e5b610e32565b500190565b6020808252818101527f4f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e6572604082015260600190565b600082821015610ea757610ea7610e32565b50039056fea2646970667358221220c2d5775b399ae28e8cb22760c0abae12eff4fe3a78eec22a64cf8a36d5c72ab364736f6c634300080b0033

46647:114:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;14638:100;;;:::i;:::-;;;;;;;:::i;:::-;;;;;;;;16978:169;;;;;;:::i;:::-;;:::i;:::-;;;1218:14:1;;1211:22;1193:41;;1181:2;1166:18;16978:169:0;1053:187:1;15758:108:0;15846:12;;15758:108;;;1391:25:1;;;1379:2;1364:18;15758:108:0;1245:177:1;17740:573:0;;;;;;:::i;:::-;;:::i;15600:93::-;;;15683:2;1902:36:1;;1890:2;1875:18;15600:93:0;1760:184:1;18722:215:0;;;;;;:::i;:::-;;:::i;28674:36::-;;;;;;:::i;:::-;;;;;;;;;;;;;;;;28947:117;;;;;;:::i;:::-;;:::i;:::-;;27732:91;;;;;;:::i;:::-;;:::i;28720:115::-;;;;;;:::i;:::-;;:::i;15929:127::-;;;;;;:::i;:::-;-1:-1:-1;;;;;16030:18:0;16003:7;16030:18;;;:9;:18;;;;;;;15929:127;26534:103;;;:::i;28142:368::-;;;;;;:::i;:::-;;:::i;25883:87::-;25929:7;25956:6;25883:87;;-1:-1:-1;;;;;25956:6:0;;;2471:51:1;;2459:2;2444:18;25883:87:0;2325:203:1;14857:104:0;;;:::i;19440:413::-;;;;;;:::i;:::-;;:::i;16269:175::-;;;;;;:::i;:::-;;:::i;16507:151::-;;;;;;:::i;:::-;-1:-1:-1;;;;;16623:18:0;;;16596:7;16623:18;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;16507:151;26792:201;;;;;;:::i;:::-;;:::i;14638:100::-;14692:13;14725:5;14718:12;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;14638:100;:::o;16978:169::-;17061:4;17078:39;818:10;17101:7;17110:6;17078:8;:39::i;:::-;-1:-1:-1;17135:4:0;16978:169;;;;:::o;17740:573::-;-1:-1:-1;;;;;17924:19:0;;17880:4;17924:19;;;:11;:19;;;;;;;;818:10;17924:33;;;;;;;;-1:-1:-1;;17972:37:0;;17968:265;;18054:6;18034:16;:26;;18026:79;;;;-1:-1:-1;;;18026:79:0;;3385:2:1;18026:79:0;;;3367:21:1;3424:2;3404:18;;;3397:30;3463:34;3443:18;;;3436:62;-1:-1:-1;;;3514:18:1;;;3507:38;3562:19;;18026:79:0;;;;;;;;;18149:57;18158:6;818:10;18199:6;18180:16;:25;18149:8;:57::i;:::-;18245:36;18255:6;18263:9;18274:6;18245:9;:36::i;:::-;-1:-1:-1;18301:4:0;;17740:573;-1:-1:-1;;;;17740:573:0:o;18722:215::-;818:10;18810:4;18859:25;;;:11;:25;;;;;;;;-1:-1:-1;;;;;18859:34:0;;;;;;;;;;18810:4;;18827:80;;18850:7;;18859:47;;18896:10;;18859:47;:::i;:::-;18827:8;:80::i;28947:117::-;28890:10;28883:18;;;;:6;:18;;;;;;;;28875:41;;;;-1:-1:-1;;;28875:41:0;;4059:2:1;28875:41:0;;;4041:21:1;4098:2;4078:18;;;4071:30;-1:-1:-1;;;4117:18:1;;;4110:40;4167:18;;28875:41:0;3857:334:1;28875:41:0;29031:24:::1;29037:8;29047:7;29031:5;:24::i;:::-;28947:117:::0;;:::o;27732:91::-;27788:27;818:10;27808:6;27788:5;:27::i;:::-;27732:91;:::o;28720:115::-;25929:7;25956:6;-1:-1:-1;;;;;25956:6:0;818:10;26103:23;26095:68;;;;-1:-1:-1;;;26095:68:0;;;;;;;:::i;:::-;-1:-1:-1;;;;;28810:16:0::1;;::::0;;;:6:::1;:16;::::0;;;;;;-1:-1:-1;;28790:36:0;::::1;28810:16;::::0;;::::1;28809:17;28790:36;::::0;;28720:115::o;26534:103::-;25929:7;25956:6;-1:-1:-1;;;;;25956:6:0;818:10;26103:23;26095:68;;;;-1:-1:-1;;;26095:68:0;;;;;;;:::i;:::-;26599:30:::1;26626:1;26599:18;:30::i;:::-;26534:103::o:0;28142:368::-;28219:24;28246:32;28256:7;818:10;16507:151;:::i;28246:32::-;28219:59;;28317:6;28297:16;:26;;28289:75;;;;-1:-1:-1;;;28289:75:0;;4759:2:1;28289:75:0;;;4741:21:1;4798:2;4778:18;;;4771:30;4837:34;4817:18;;;4810:62;-1:-1:-1;;;4888:18:1;;;4881:34;4932:19;;28289:75:0;4557:400:1;28289:75:0;28400:58;28409:7;818:10;28451:6;28432:16;:25;28400:8;:58::i;:::-;28480:22;28486:7;28495:6;28480:5;:22::i;:::-;28208:302;28142:368;;:::o;14857:104::-;14913:13;14946:7;14939:14;;;;;:::i;19440:413::-;818:10;19533:4;19577:25;;;:11;:25;;;;;;;;-1:-1:-1;;;;;19577:34:0;;;;;;;;;;19630:35;;;;19622:85;;;;-1:-1:-1;;;19622:85:0;;5164:2:1;19622:85:0;;;5146:21:1;5203:2;5183:18;;;5176:30;5242:34;5222:18;;;5215:62;-1:-1:-1;;;5293:18:1;;;5286:35;5338:19;;19622:85:0;4962:401:1;19622:85:0;19743:67;818:10;19766:7;19794:15;19775:16;:34;19743:8;:67::i;:::-;-1:-1:-1;19841:4:0;;19440:413;-1:-1:-1;;;19440:413:0:o;16269:175::-;16355:4;16372:42;818:10;16396:9;16407:6;16372:9;:42::i;26792:201::-;25929:7;25956:6;-1:-1:-1;;;;;25956:6:0;818:10;26103:23;26095:68;;;;-1:-1:-1;;;26095:68:0;;;;;;;:::i;:::-;-1:-1:-1;;;;;26881:22:0;::::1;26873:73;;;::::0;-1:-1:-1;;;26873:73:0;;5570:2:1;26873:73:0::1;::::0;::::1;5552:21:1::0;5609:2;5589:18;;;5582:30;5648:34;5628:18;;;5621:62;-1:-1:-1;;;5699:18:1;;;5692:36;5745:19;;26873:73:0::1;5368:402:1::0;26873:73:0::1;26957:28;26976:8;26957:18;:28::i;23124:380::-:0;-1:-1:-1;;;;;23260:19:0;;23252:68;;;;-1:-1:-1;;;23252:68:0;;5977:2:1;23252:68:0;;;5959:21:1;6016:2;5996:18;;;5989:30;6055:34;6035:18;;;6028:62;-1:-1:-1;;;6106:18:1;;;6099:34;6150:19;;23252:68:0;5775:400:1;23252:68:0;-1:-1:-1;;;;;23339:21:0;;23331:68;;;;-1:-1:-1;;;23331:68:0;;6382:2:1;23331:68:0;;;6364:21:1;6421:2;6401:18;;;6394:30;6460:34;6440:18;;;6433:62;-1:-1:-1;;;6511:18:1;;;6504:32;6553:19;;23331:68:0;6180:398:1;23331:68:0;-1:-1:-1;;;;;23412:18:0;;;;;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;:36;;;23464:32;;1391:25:1;;;23464:32:0;;1364:18:1;23464:32:0;;;;;;;23124:380;;;:::o;20343:733::-;-1:-1:-1;;;;;20483:20:0;;20475:70;;;;-1:-1:-1;;;20475:70:0;;6785:2:1;20475:70:0;;;6767:21:1;6824:2;6804:18;;;6797:30;6863:34;6843:18;;;6836:62;-1:-1:-1;;;6914:18:1;;;6907:35;6959:19;;20475:70:0;6583:401:1;20475:70:0;-1:-1:-1;;;;;20564:23:0;;20556:71;;;;-1:-1:-1;;;20556:71:0;;7191:2:1;20556:71:0;;;7173:21:1;7230:2;7210:18;;;7203:30;7269:34;7249:18;;;7242:62;-1:-1:-1;;;7320:18:1;;;7313:33;7363:19;;20556:71:0;6989:399:1;20556:71:0;-1:-1:-1;;;;;20724:17:0;;20700:21;20724:17;;;:9;:17;;;;;;20760:23;;;;20752:74;;;;-1:-1:-1;;;20752:74:0;;7595:2:1;20752:74:0;;;7577:21:1;7634:2;7614:18;;;7607:30;7673:34;7653:18;;;7646:62;-1:-1:-1;;;7724:18:1;;;7717:36;7770:19;;20752:74:0;7393:402:1;20752:74:0;-1:-1:-1;;;;;20862:17:0;;;;;;;:9;:17;;;;;;20882:22;;;20862:42;;20926:20;;;;;;;;:30;;20898:6;;20862:17;20926:30;;20898:6;;20926:30;:::i;:::-;;;;;;;;20991:9;-1:-1:-1;;;;;20974:35:0;20983:6;-1:-1:-1;;;;;20974:35:0;;21002:6;20974:35;;;;1391:25:1;;1379:2;1364:18;;1245:177;20974:35:0;;;;;;;;20464:612;20343:733;;;:::o;21363:399::-;-1:-1:-1;;;;;21447:21:0;;21439:65;;;;-1:-1:-1;;;21439:65:0;;8002:2:1;21439:65:0;;;7984:21:1;8041:2;8021:18;;;8014:30;8080:33;8060:18;;;8053:61;8131:18;;21439:65:0;7800:355:1;21439:65:0;21595:6;21579:12;;:22;;;;;;;:::i;:::-;;;;-1:-1:-1;;;;;;;21612:18:0;;;;;;:9;:18;;;;;:28;;21634:6;;21612:18;:28;;21634:6;;21612:28;:::i;:::-;;;;-1:-1:-1;;21656:37:0;;1391:25:1;;;-1:-1:-1;;;;;21656:37:0;;;21673:1;;21656:37;;1379:2:1;1364:18;21656:37:0;;;;;;;28947:117;;:::o;22095:591::-;-1:-1:-1;;;;;22179:21:0;;22171:67;;;;-1:-1:-1;;;22171:67:0;;8362:2:1;22171:67:0;;;8344:21:1;8401:2;8381:18;;;8374:30;8440:34;8420:18;;;8413:62;-1:-1:-1;;;8491:18:1;;;8484:31;8532:19;;22171:67:0;8160:397:1;22171:67:0;-1:-1:-1;;;;;22338:18:0;;22313:22;22338:18;;;:9;:18;;;;;;22375:24;;;;22367:71;;;;-1:-1:-1;;;22367:71:0;;8764:2:1;22367:71:0;;;8746:21:1;8803:2;8783:18;;;8776:30;8842:34;8822:18;;;8815:62;-1:-1:-1;;;8893:18:1;;;8886:32;8935:19;;22367:71:0;8562:398:1;22367:71:0;-1:-1:-1;;;;;22474:18:0;;;;;;:9;:18;;;;;22495:23;;;22474:44;;22540:12;:22;;22512:6;;22474:18;22540:22;;22512:6;;22540:22;:::i;:::-;;;;-1:-1:-1;;22580:37:0;;1391:25:1;;;22606:1:0;;-1:-1:-1;;;;;22580:37:0;;;;;1379:2:1;1364:18;22580:37:0;;;;;;;28208:302;28142:368;;:::o;27153:191::-;27227:16;27246:6;;-1:-1:-1;;;;;27263:17:0;;;-1:-1:-1;;;;;;27263:17:0;;;;;;27296:40;;27246:6;;;;;;;27296:40;;27227:16;27296:40;27216:128;27153:191;:::o;14:597:1:-;126:4;155:2;184;173:9;166:21;216:6;210:13;259:6;254:2;243:9;239:18;232:34;284:1;294:140;308:6;305:1;302:13;294:140;;;403:14;;;399:23;;393:30;369:17;;;388:2;365:26;358:66;323:10;;294:140;;;452:6;449:1;446:13;443:91;;;522:1;517:2;508:6;497:9;493:22;489:31;482:42;443:91;-1:-1:-1;595:2:1;574:15;-1:-1:-1;;570:29:1;555:45;;;;602:2;551:54;;14:597;-1:-1:-1;;;14:597:1:o;616:173::-;684:20;;-1:-1:-1;;;;;733:31:1;;723:42;;713:70;;779:1;776;769:12;713:70;616:173;;;:::o;794:254::-;862:6;870;923:2;911:9;902:7;898:23;894:32;891:52;;;939:1;936;929:12;891:52;962:29;981:9;962:29;:::i;:::-;952:39;1038:2;1023:18;;;;1010:32;;-1:-1:-1;;;794:254:1:o;1427:328::-;1504:6;1512;1520;1573:2;1561:9;1552:7;1548:23;1544:32;1541:52;;;1589:1;1586;1579:12;1541:52;1612:29;1631:9;1612:29;:::i;:::-;1602:39;;1660:38;1694:2;1683:9;1679:18;1660:38;:::i;:::-;1650:48;;1745:2;1734:9;1730:18;1717:32;1707:42;;1427:328;;;;;:::o;1949:186::-;2008:6;2061:2;2049:9;2040:7;2036:23;2032:32;2029:52;;;2077:1;2074;2067:12;2029:52;2100:29;2119:9;2100:29;:::i;:::-;2090:39;1949:186;-1:-1:-1;;;1949:186:1:o;2140:180::-;2199:6;2252:2;2240:9;2231:7;2227:23;2223:32;2220:52;;;2268:1;2265;2258:12;2220:52;-1:-1:-1;2291:23:1;;2140:180;-1:-1:-1;2140:180:1:o;2533:260::-;2601:6;2609;2662:2;2650:9;2641:7;2637:23;2633:32;2630:52;;;2678:1;2675;2668:12;2630:52;2701:29;2720:9;2701:29;:::i;:::-;2691:39;;2749:38;2783:2;2772:9;2768:18;2749:38;:::i;:::-;2739:48;;2533:260;;;;;:::o;2798:380::-;2877:1;2873:12;;;;2920;;;2941:61;;2995:4;2987:6;2983:17;2973:27;;2941:61;3048:2;3040:6;3037:14;3017:18;3014:38;3011:161;;;3094:10;3089:3;3085:20;3082:1;3075:31;3129:4;3126:1;3119:15;3157:4;3154:1;3147:15;3011:161;;2798:380;;;:::o;3592:127::-;3653:10;3648:3;3644:20;3641:1;3634:31;3684:4;3681:1;3674:15;3708:4;3705:1;3698:15;3724:128;3764:3;3795:1;3791:6;3788:1;3785:13;3782:39;;;3801:18;;:::i;:::-;-1:-1:-1;3837:9:1;;3724:128::o;4196:356::-;4398:2;4380:21;;;4417:18;;;4410:30;4476:34;4471:2;4456:18;;4449:62;4543:2;4528:18;;4196:356::o;8965:125::-;9005:4;9033:1;9030;9027:8;9024:34;;;9038:18;;:::i;:::-;-1:-1:-1;9075:9:1;;8965:125::o

ipfs://c2d5775b399ae28e8cb22760c0abae12eff4fe3a78eec22a64cf8a36d5c72ab3