Contract 0xe63e0e297c7e8e8bac32666c137d0b2914acbcb0

/**
 *Submitted for verification at FtmScan.com on 2023-03-19
*/

// Sources flattened with hardhat v2.12.7 https://hardhat.org

// File contracts/token/Pearls.sol

 

pragma solidity ^0.8.0;


/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastValue;
                // Update the index for the moved value
                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value)
        private
        view
        returns (bool)
    {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index)
        private
        view
        returns (bytes32)
    {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value)
        internal
        returns (bool)
    {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value)
        internal
        returns (bool)
    {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value)
        internal
        view
        returns (bool)
    {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index)
        internal
        view
        returns (bytes32)
    {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set)
        internal
        view
        returns (bytes32[] memory)
    {
        bytes32[] memory store = _values(set._inner);
        bytes32[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value)
        internal
        returns (bool)
    {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value)
        internal
        returns (bool)
    {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value)
        internal
        view
        returns (bool)
    {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index)
        internal
        view
        returns (address)
    {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set)
        internal
        view
        returns (address[] memory)
    {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value)
        internal
        returns (bool)
    {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value)
        internal
        view
        returns (bool)
    {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index)
        internal
        view
        returns (uint256)
    {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set)
        internal
        view
        returns (uint256[] memory)
    {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/introspection/IERC165.sol

// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/introspection/ERC165.sol

// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId)
        public
        view
        virtual
        override
        returns (bool)
    {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/math/Math.sol

// OpenZeppelin Contracts (last updated v4.7.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding)
        internal
        pure
        returns (uint256)
    {
        unchecked {
            uint256 result = sqrt(a);
            return
                result +
                (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding)
        internal
        pure
        returns (uint256)
    {
        unchecked {
            uint256 result = log2(value);
            return
                result +
                (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding)
        internal
        pure
        returns (uint256)
    {
        unchecked {
            uint256 result = log10(value);
            return
                result +
                (rounding == Rounding.Up && 10**result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding)
        internal
        pure
        returns (uint256)
    {
        unchecked {
            uint256 result = log256(value);
            return
                result +
                (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
        }
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/Strings.sol

// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length)
        internal
        pure
        returns (string memory)
    {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/access/IAccessControl.sol

// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)

pragma solidity ^0.8.0;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(
        bytes32 indexed role,
        bytes32 indexed previousAdminRole,
        bytes32 indexed newAdminRole
    );

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(
        bytes32 indexed role,
        address indexed account,
        address indexed sender
    );

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(
        bytes32 indexed role,
        address indexed account,
        address indexed sender
    );

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account)
        external
        view
        returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) external;
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/access/IAccessControlEnumerable.sol

// OpenZeppelin Contracts v4.4.1 (access/IAccessControlEnumerable.sol)

pragma solidity ^0.8.0;

/**
 * @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
 */
interface IAccessControlEnumerable is IAccessControl {
    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index)
        external
        view
        returns (address);

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) external view returns (uint256);
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/Context.sol

// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/access/AccessControl.sol

// OpenZeppelin Contracts (last updated v4.7.0) (access/AccessControl.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping(address => bool) members;
        bytes32 adminRole;
    }

    mapping(bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with a standardized message including the required role.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     *
     * _Available since v4.1._
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId)
        public
        view
        virtual
        override
        returns (bool)
    {
        return
            interfaceId == type(IAccessControl).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account)
        public
        view
        virtual
        override
        returns (bool)
    {
        return _roles[role].members[account];
    }

    /**
     * @dev Revert with a standard message if `_msgSender()` is missing `role`.
     * Overriding this function changes the behavior of the {onlyRole} modifier.
     *
     * Format of the revert message is described in {_checkRole}.
     *
     * _Available since v4.6._
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }

    /**
     * @dev Revert with a standard message if `account` is missing `role`.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert(
                string(
                    abi.encodePacked(
                        "AccessControl: account ",
                        Strings.toHexString(account),
                        " is missing role ",
                        Strings.toHexString(uint256(role), 32)
                    )
                )
            );
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role)
        public
        view
        virtual
        override
        returns (bytes32)
    {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleGranted} event.
     */
    function grantRole(bytes32 role, address account)
        public
        virtual
        override
        onlyRole(getRoleAdmin(role))
    {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleRevoked} event.
     */
    function revokeRole(bytes32 role, address account)
        public
        virtual
        override
        onlyRole(getRoleAdmin(role))
    {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     *
     * May emit a {RoleRevoked} event.
     */
    function renounceRole(bytes32 role, address account)
        public
        virtual
        override
    {
        require(
            account == _msgSender(),
            "AccessControl: can only renounce roles for self"
        );

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * May emit a {RoleGranted} event.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     *
     * NOTE: This function is deprecated in favor of {_grantRole}.
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleGranted} event.
     */
    function _grantRole(bytes32 role, address account) internal virtual {
        if (!hasRole(role, account)) {
            _roles[role].members[account] = true;
            emit RoleGranted(role, account, _msgSender());
        }
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleRevoked} event.
     */
    function _revokeRole(bytes32 role, address account) internal virtual {
        if (hasRole(role, account)) {
            _roles[role].members[account] = false;
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/access/AccessControlEnumerable.sol

// OpenZeppelin Contracts (last updated v4.5.0) (access/AccessControlEnumerable.sol)

pragma solidity ^0.8.0;

/**
 * @dev Extension of {AccessControl} that allows enumerating the members of each role.
 */
abstract contract AccessControlEnumerable is
    IAccessControlEnumerable,
    AccessControl
{
    using EnumerableSet for EnumerableSet.AddressSet;

    mapping(bytes32 => EnumerableSet.AddressSet) private _roleMembers;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId)
        public
        view
        virtual
        override
        returns (bool)
    {
        return
            interfaceId == type(IAccessControlEnumerable).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index)
        public
        view
        virtual
        override
        returns (address)
    {
        return _roleMembers[role].at(index);
    }

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role)
        public
        view
        virtual
        override
        returns (uint256)
    {
        return _roleMembers[role].length();
    }

    /**
     * @dev Overload {_grantRole} to track enumerable memberships
     */
    function _grantRole(bytes32 role, address account)
        internal
        virtual
        override
    {
        super._grantRole(role, account);
        _roleMembers[role].add(account);
    }

    /**
     * @dev Overload {_revokeRole} to track enumerable memberships
     */
    function _revokeRole(bytes32 role, address account)
        internal
        virtual
        override
    {
        super._revokeRole(role, account);
        _roleMembers[role].remove(account);
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/access/Ownable.sol

// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(
        address indexed previousOwner,
        address indexed newOwner
    );

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/Address.sol

// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(
            address(this).balance >= amount,
            "Address: insufficient balance"
        );

        (bool success, ) = recipient.call{value: amount}("");
        require(
            success,
            "Address: unable to send value, recipient may have reverted"
        );
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return
            functionCallWithValue(
                target,
                data,
                0,
                "Address: low-level call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return
            functionCallWithValue(
                target,
                data,
                value,
                "Address: low-level call with value failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(
            address(this).balance >= value,
            "Address: insufficient balance for call"
        );
        (bool success, bytes memory returndata) = target.call{value: value}(
            data
        );
        return
            verifyCallResultFromTarget(
                target,
                success,
                returndata,
                errorMessage
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data)
        internal
        view
        returns (bytes memory)
    {
        return
            functionStaticCall(
                target,
                data,
                "Address: low-level static call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return
            verifyCallResultFromTarget(
                target,
                success,
                returndata,
                errorMessage
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return
            functionDelegateCall(
                target,
                data,
                "Address: low-level delegate call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return
            verifyCallResultFromTarget(
                target,
                success,
                returndata,
                errorMessage
            );
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage)
        private
        pure
    {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/extensions/draft-IERC20Permit.sol

// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/IERC20.sol

// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender)
        external
        view
        returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/extensions/IERC20Metadata.sol

// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/ERC20.sol

// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account)
        public
        view
        virtual
        override
        returns (uint256)
    {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount)
        public
        virtual
        override
        returns (bool)
    {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender)
        public
        view
        virtual
        override
        returns (uint256)
    {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount)
        public
        virtual
        override
        returns (bool)
    {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue)
        public
        virtual
        returns (bool)
    {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue)
        public
        virtual
        returns (bool)
    {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(
            currentAllowance >= subtractedValue,
            "ERC20: decreased allowance below zero"
        );
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(
            fromBalance >= amount,
            "ERC20: transfer amount exceeds balance"
        );
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(
                currentAllowance >= amount,
                "ERC20: insufficient allowance"
            );
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/extensions/ERC20Burnable.sol

// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/extensions/ERC20Burnable.sol)

pragma solidity ^0.8.0;

/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        _spendAllowance(account, _msgSender(), amount);
        _burn(account, amount);
    }
}

// File: contracts/ERC20PresetMinterRebaser.sol

pragma solidity ^0.8.0;

contract ERC20PresetMinterRebaser is
    Context,
    AccessControlEnumerable,
    ERC20Burnable
{
    bytes32 public constant MINTER_ROLE = keccak256("MINTER_ROLE");
    bytes32 public constant REBASER_ROLE = keccak256("REBASER_ROLE");

    constructor(string memory name, string memory symbol) ERC20(name, symbol) {
        _setupRole(DEFAULT_ADMIN_ROLE, _msgSender());

        _setupRole(MINTER_ROLE, _msgSender());
        _setupRole(REBASER_ROLE, _msgSender());
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/utils/SafeERC20.sol

// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.transfer.selector, to, value)
        );
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.transferFrom.selector, from, to, value)
        );
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.approve.selector, spender, value)
        );
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(
                token.approve.selector,
                spender,
                newAllowance
            )
        );
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(
                oldAllowance >= value,
                "SafeERC20: decreased allowance below zero"
            );
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(
                token,
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    newAllowance
                )
            );
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(
            nonceAfter == nonceBefore + 1,
            "SafeERC20: permit did not succeed"
        );
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(
            data,
            "SafeERC20: low-level call failed"
        );
        if (returndata.length > 0) {
            // Return data is optional
            require(
                abi.decode(returndata, (bool)),
                "SafeERC20: ERC20 operation did not succeed"
            );
        }
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/math/SafeMath.sol

// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// File: contracts/IPEARLS.sol

pragma solidity ^0.8.0;

abstract contract IPEARLS {
    /**
     * @notice Event emitted when tokens are rebased
     */
    event Rebase(
        uint256 epoch,
        uint256 prevPearlsScalingFactor,
        uint256 newPearlsScalingFactor
    );

    /* - Extra Events - */
    /**
     * @notice Tokens minted event
     */
    event Mint(address to, uint256 amount);

    /**
     * @notice Tokens burned event
     */
    event Burn(address from, uint256 amount);
}

interface IRebaseHelper {
    function afterRebase(address, uint256, uint256, bool) external;
}

// File: contracts/Pearls.sol

pragma solidity ^0.8.0;

contract PEARLS is ERC20PresetMinterRebaser, Ownable, IPEARLS {

    /**
     * @dev Guard variable for re-entrancy checks. Not currently used
     */
    bool internal _notEntered;

    /**
     * @notice Internal decimals used to handle scaling factor
     */
    uint256 public constant internalDecimals = 10**24;

    /**
     * @notice Used for percentage maths
     */
    uint256 public constant BASE = 10**18;

    /**
     * @notice Scaling factor that adjusts everyone's balances
     */
    uint256 public pearlsScalingFactor;

    mapping(address => uint256) internal _pearlsBalances;

    mapping(address => mapping(address => uint256)) internal _allowedFragments;

    uint256 public initSupply;

    // keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
    bytes32 public constant PERMIT_TYPEHASH =
        0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
    bytes32 public DOMAIN_SEPARATOR;

    mapping(address => uint256) public nonces;

    /// @notice The EIP-712 typehash for the contract's domain
    bytes32 public constant DOMAIN_TYPEHASH =
        keccak256(
            "EIP712Domain(string name,uint256 chainId,address verifyingContract)"
        );

    uint256 private INIT_SUPPLY = 3324324324357 * 10**18;
    uint256 private _totalSupply;
    address public rebaseHelper;

    modifier validRecipient(address to) {
        require(to != address(0x0));
        require(to != address(this));
        _;
    }

    constructor() ERC20PresetMinterRebaser("Pearls", "PEARLS") {
        pearlsScalingFactor = BASE;
        initSupply = _fragmentToPearls(INIT_SUPPLY);
        _totalSupply = INIT_SUPPLY;
        _pearlsBalances[owner()] = initSupply;

        emit Transfer(address(0), msg.sender, INIT_SUPPLY);
    }

    /**
     * @return The total number of fragments.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @notice Computes the current max scaling factor
     */
    function maxScalingFactor() external view returns (uint256) {
        return _maxScalingFactor();
    }

    function _maxScalingFactor() internal view returns (uint256) {
        // scaling factor can only go up to 2**256-1 = initSupply * pearlsScalingFactor
        // this is used to check if pearlsScalingFactor will be too high to compute balances when rebasing.
        return uint256(int256(-1)) / initSupply;
    }

    /**
     * @notice Mints new tokens, increasing totalSupply, initSupply, and a users balance.
     */
    function mint(address to, uint256 amount) external returns (bool) {
        require(hasRole(MINTER_ROLE, _msgSender()), "Must have minter role");

        _mint(to, amount);
        return true;
    }

    function _mint(address to, uint256 amount) internal override {

        // increase totalSupply
        _totalSupply = _totalSupply + amount;

        // get underlying value
        uint256 pearlsValue = _fragmentToPearls(amount);

        // increase initSupply
        initSupply = initSupply + pearlsValue;

        // make sure the mint didnt push maxScalingFactor too low
        require(
            pearlsScalingFactor <= _maxScalingFactor(),
            "max scaling factor too low"
        );

        // add balance
        _pearlsBalances[to] = _pearlsBalances[to] + pearlsValue;

        emit Mint(to, amount);
        emit Transfer(address(0), to, amount);
    }

    /**
     * @notice Burns tokens from msg.sender, decreases totalSupply, initSupply, and a users balance.
     */

    function burn(uint256 amount) public override {
        _burn(amount);
    }

    function _burn(uint256 amount) internal {
        // decrease totalSupply
        _totalSupply = _totalSupply - amount;

        // get underlying value
        uint256 pearlsValue = _fragmentToPearls(amount);

        // decrease initSupply
        initSupply = initSupply - pearlsValue;

        // decrease balance
        _pearlsBalances[msg.sender] = _pearlsBalances[msg.sender] - pearlsValue;
        emit Burn(msg.sender, amount);
        emit Transfer(msg.sender, address(0), amount);
    }

    /**
     * @notice Mints new tokens using underlying amount, increasing totalSupply, initSupply, and a users balance.
     */
    function mintUnderlying(address to, uint256 amount) public returns (bool) {
        require(hasRole(MINTER_ROLE, _msgSender()), "Must have minter role");

        _mintUnderlying(to, amount);
        return true;
    }

    function _mintUnderlying(address to, uint256 amount) internal {
        // increase initSupply
        initSupply = initSupply + amount;

        // get external value
        uint256 scaledAmount = _pearlsToFragment(amount);

        // increase totalSupply
        _totalSupply = _totalSupply + scaledAmount;

        // make sure the mint didnt push maxScalingFactor too low
        require(
            pearlsScalingFactor <= _maxScalingFactor(),
            "max scaling factor too low"
        );

        // add balance
        _pearlsBalances[to] = _pearlsBalances[to] + amount;
        emit Mint(to, scaledAmount);
        emit Transfer(address(0), to, scaledAmount);
    }

    /**
     * @dev Transfer underlying balance to a specified address.
     * @param to The address to transfer to.
     * @param value The amount to be transferred.
     * @return True on success, false otherwise.
     */
    function transferUnderlying(address to, uint256 value)
        public
        validRecipient(to)
        returns (bool)
    {
        // sub from balance of sender
        _pearlsBalances[msg.sender] = _pearlsBalances[msg.sender] - value;

        // add to balance of receiver
        _pearlsBalances[to] = _pearlsBalances[to] + value;
        emit Transfer(msg.sender, to, _pearlsToFragment(value));
        return true;
    }

    /* - ERC20 functionality - */

    /**
     * @dev Transfer tokens to a specified address.
     * @param to The address to transfer to.
     * @param value The amount to be transferred.
     * @return True on success, false otherwise.
     */
    function transfer(address to, uint256 value)
        public
        override
        validRecipient(to)
        returns (bool)
    {
        // underlying balance is stored in pearls, so divide by current scaling factor

        // note, this means as scaling factor grows, dust will be untransferrable.
        // minimum transfer value == pearlsScalingFactor / 1e24;


        // get amount in underlying
        uint256 pearlsValue = _fragmentToPearls(value);

        // sub from balance of sender
        _pearlsBalances[msg.sender] = _pearlsBalances[msg.sender] - pearlsValue;

        // add to balance of receiver
        _pearlsBalances[to] = _pearlsBalances[to] + pearlsValue;

        emit Transfer(msg.sender, to, value);

        return true;
    }

    /**
     * @dev Transfer tokens from one address to another.
     * @param from The address you want to send tokens from.
     * @param to The address you want to transfer to.
     * @param value The amount of tokens to be transferred.
     */
    function transferFrom(
        address from,
        address to,
        uint256 value
    ) public override validRecipient(to) returns (bool) {
        // decrease allowance
        _allowedFragments[from][msg.sender] = _allowedFragments[from][
            msg.sender
        ] - value;

        // get value in pearls
        uint256 pearlsValue = _fragmentToPearls(value);

        // sub from from
        _pearlsBalances[from] = _pearlsBalances[from] - pearlsValue;
        _pearlsBalances[to] = _pearlsBalances[to] + pearlsValue;


        emit Transfer(from, to, value);

        return true;
    }

    /**
     * @param who The address to query.
     * @return The balance of the specified address.
     */
    function balanceOf(address who) public view override returns (uint256) {
        return _pearlsToFragment(_pearlsBalances[who]);
    }

    /** @notice Currently returns the internal storage amount
     * @param who The address to query.
     * @return The underlying balance of the specified address.
     */
    function balanceOfUnderlying(address who) public view returns (uint256) {
        return _pearlsBalances[who];
    }

    /**
     * @dev Function to check the amount of tokens that an owner has allowed to a spender.
     * @param owner_ The address which owns the funds.
     * @param spender The address which will spend the funds.
     * @return The number of tokens still available for the spender.
     */
    function allowance(address owner_, address spender)
        public
        view
        override
        returns (uint256)
    {
        return _allowedFragments[owner_][spender];
    }

    /**
     * @dev Approve the passed address to spend the specified amount of tokens on behalf of
     * msg.sender. This method is included for ERC20 compatibility.
     * increaseAllowance and decreaseAllowance should be used instead.
     * Changing an allowance with this method brings the risk that someone may transfer both
     * the old and the new allowance - if they are both greater than zero - if a transfer
     * transaction is mined before the later approve() call is mined.
     *
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     */
    function approve(address spender, uint256 value)
        public
        override
        returns (bool)
    {
        _allowedFragments[msg.sender][spender] = value;
        emit Approval(msg.sender, spender, value);
        return true;
    }

    /**
     * @dev Increase the amount of tokens that an owner has allowed to a spender.
     * This method should be used instead of approve() to avoid the double approval vulnerability
     * described above.
     * @param spender The address which will spend the funds.
     * @param addedValue The amount of tokens to increase the allowance by.
     */
    function increaseAllowance(address spender, uint256 addedValue)
        public
        override
        returns (bool)
    {
        _allowedFragments[msg.sender][spender] = _allowedFragments[msg.sender][
            spender
        ] + addedValue;
        emit Approval(
            msg.sender,
            spender,
            _allowedFragments[msg.sender][spender]
        );
        return true;
    }

    /**
     * @dev Decrease the amount of tokens that an owner has allowed to a spender.
     *
     * @param spender The address which will spend the funds.
     * @param subtractedValue The amount of tokens to decrease the allowance by.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue)
        public
        override
        returns (bool)
    {
        uint256 oldValue = _allowedFragments[msg.sender][spender];
        if (subtractedValue >= oldValue) {
            _allowedFragments[msg.sender][spender] = 0;
        } else {
            _allowedFragments[msg.sender][spender] = oldValue - subtractedValue;
        }
        emit Approval(
            msg.sender,
            spender,
            _allowedFragments[msg.sender][spender]
        );
        return true;
    }

    // --- Approve by signature ---
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public {
        require(block.timestamp <= deadline, "PEARLS/permit-expired");

        bytes32 digest = keccak256(
            abi.encodePacked(
                "\x19\x01",
                DOMAIN_SEPARATOR,
                keccak256(
                    abi.encode(
                        PERMIT_TYPEHASH,
                        owner,
                        spender,
                        value,
                        nonces[owner]++,
                        deadline
                    )
                )
            )
        );

        require(owner != address(0), "PEARLS/invalid-address-0");
        require(owner == ecrecover(digest, v, r, s), "PEARLS/invalid-permit");
        _allowedFragments[owner][spender] = value;
        emit Approval(owner, spender, value);
    }

    function rebase(
        uint256 epoch,
        uint256 indexDelta,
        bool positive
    ) public returns (uint256) {
        require(hasRole(REBASER_ROLE, _msgSender()), "Must have rebaser role");

        // no change
        if (indexDelta == 0) {
            emit Rebase(epoch, pearlsScalingFactor, pearlsScalingFactor);
            return _totalSupply;
        }

        // for events
        uint256 prevPearlsScalingFactor = pearlsScalingFactor;

        if (!positive) {
            // negative rebase, decrease scaling factor
            pearlsScalingFactor = pearlsScalingFactor * (BASE - indexDelta) / BASE;
        } else {
            // positive rebase, increase scaling factor
            uint256 newScalingFactor = pearlsScalingFactor * (BASE + indexDelta) / BASE;
            if (newScalingFactor < _maxScalingFactor()) {
                pearlsScalingFactor = newScalingFactor;
            } else {
                pearlsScalingFactor = _maxScalingFactor();
            }
        }

        // update total supply, correctly
        _totalSupply = _pearlsToFragment(initSupply);

        //cleanup such as sync
        if(rebaseHelper != address(0)){
            IRebaseHelper(rebaseHelper).afterRebase(msg.sender, epoch, indexDelta, positive);
        }

        emit Rebase(epoch, prevPearlsScalingFactor, pearlsScalingFactor);
        return _totalSupply;
    }

    function pearlsToFragment(uint256 pearls) public view returns (uint256) {
        return _pearlsToFragment(pearls);
    }

    function fragmentToPearls(uint256 value) public view returns (uint256) {
        return _fragmentToPearls(value);
    }

    function _pearlsToFragment(uint256 pearls) internal view returns (uint256) {
        return pearls * pearlsScalingFactor / internalDecimals;
    }

    function _fragmentToPearls(uint256 value) internal view returns (uint256) {
        return value * internalDecimals / pearlsScalingFactor;
    }

    // Rescue tokens
    function rescueTokens(
        address token,
        address to,
        uint256 amount
    ) public onlyOwner returns (bool) {
        // transfer to
        SafeERC20.safeTransfer(IERC20(token), to, amount);
        return true;
    }

    function setRebaseHelper(address _rebaseHelper) public onlyOwner {
        rebaseHelper = _rebaseHelper;
    }

}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"from","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Burn","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Mint","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"epoch","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"prevPearlsScalingFactor","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newPearlsScalingFactor","type":"uint256"}],"name":"Rebase","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"BASE","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DOMAIN_SEPARATOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DOMAIN_TYPEHASH","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MINTER_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"PERMIT_TYPEHASH","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"REBASER_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner_","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"who","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"who","type":"address"}],"name":"balanceOfUnderlying","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burnFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"value","type":"uint256"}],"name":"fragmentToPearls","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"uint256","name":"index","type":"uint256"}],"name":"getRoleMember","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleMemberCount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"initSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"internalDecimals","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"maxScalingFactor","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"mint","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"mintUnderlying","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"nonces","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pearlsScalingFactor","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"pearls","type":"uint256"}],"name":"pearlsToFragment","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"permit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"epoch","type":"uint256"},{"internalType":"uint256","name":"indexDelta","type":"uint256"},{"internalType":"bool","name":"positive","type":"bool"}],"name":"rebase","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"rebaseHelper","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"rescueTokens","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_rebaseHelper","type":"address"}],"name":"setRebaseHelper","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferUnderlying","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"}]

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

96106:15026:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;46153:290;;;;;;:::i;:::-;;:::i;:::-;;;470:14:1;;463:22;445:41;;433:2;418:18;46153:290:0;;;;;;;;96628:34;;;;;;;;;643:25:1;;;631:2;616:18;96628:34:0;497:177:1;69756:100:0;;;:::i;:::-;;;;;;;:::i;105804:251::-;;;;;;:::i;:::-;;:::i;98228:105::-;;;:::i;98046:100::-;98126:12;;98046:100;;110301:121;;;;;;:::i;:::-;;:::i;110170:123::-;;;;;;:::i;:::-;;:::i;97490:27::-;;;;;-1:-1:-1;;;;;97490:27:0;;;;;;-1:-1:-1;;;;;2116:32:1;;;2098:51;;2086:2;2071:18;97490:27:0;1952:203:1;97232:155:0;;97283:104;97232:155;;103476:626;;;;;;:::i;:::-;;:::i;41471:181::-;;;;;;:::i;:::-;;:::i;41962:188::-;;;;;;:::i;:::-;;:::i;:::-;;96954:117;;-1:-1:-1;;;;;;;;;;;96954:117:0;;70718:93;;;70801:2;3261:36:1;;3249:2;3234:18;70718:93:0;3119:184:1;101726:440:0;;;;;;:::i;:::-;;:::i;97078:31::-;;;;;;43188:287;;;;;;:::i;:::-;;:::i;106428:419::-;;;;;;:::i;:::-;;:::i;104545:118::-;;;;;;:::i;:::-;-1:-1:-1;;;;;104635:20:0;104608:7;104635:20;;;:15;:20;;;;;;;104545:118;98775:205;;;;;;:::i;:::-;;:::i;99816:78::-;;;;;;:::i;:::-;;:::i;96382:49::-;;96425:6;96382:49;;104223:136;;;;;;:::i;:::-;;:::i;50169:103::-;;;:::i;82353:164::-;;;;;;:::i;:::-;;:::i;108736:1426::-;;;;;;:::i;:::-;;:::i;97118:41::-;;;;;;:::i;:::-;;;;;;;;;;;;;;82779:64;;-1:-1:-1;;;;;;;;;;;82779:64:0;;49521:87;;;:::i;47042:203::-;;;;;;:::i;:::-;;:::i;100555:223::-;;;;;;:::i;:::-;;:::i;39894:197::-;;;;;;:::i;:::-;;:::i;69975:104::-;;;:::i;96815:25::-;;;;;;38923:49;;38968:4;38923:49;;107109:577;;;;;;:::i;:::-;;:::i;102429:785::-;;;;;;:::i;:::-;;:::i;47419:192::-;;;;;;:::i;:::-;;:::i;111015:112::-;;;;;;:::i;:::-;;:::i;110762:245::-;;;;;;:::i;:::-;;:::i;107731:997::-;;;;;;:::i;:::-;;:::i;82710:62::-;;-1:-1:-1;;;;;;;;;;;82710:62:0;;42443:190;;;;;;:::i;:::-;;:::i;104970:192::-;;;;;;:::i;:::-;;:::i;96500:37::-;;96531:6;96500:37;;50427:238;;;;;;:::i;:::-;;:::i;46153:290::-;46283:4;-1:-1:-1;;;;;;46325:57:0;;-1:-1:-1;;;46325:57:0;;:110;;;46399:36;46423:11;46399:23;:36::i;:::-;46305:130;46153:290;-1:-1:-1;;46153:290:0:o;69756:100::-;69810:13;69843:5;69836:12;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;69756:100;:::o;105804:251::-;105945:10;105905:4;105927:29;;;:17;:29;;;;;;;;-1:-1:-1;;;;;105927:38:0;;;;;;;;;;:46;;;105989:36;105905:4;;105927:38;;-1:-1:-1;;;;;;;;;;;105989:36:0;;;105968:5;643:25:1;;631:2;616:18;;497:177;105989:36:0;;;;;;;;-1:-1:-1;106043:4:0;105804:251;;;;:::o;98228:105::-;98279:7;98306:19;:17;:19::i;:::-;98299:26;;98228:105;:::o;110301:121::-;110363:7;110390:24;110408:5;110390:17;:24::i;110170:123::-;110233:7;110260:25;110278:6;110260:17;:25::i;103476:626::-;103617:4;103604:2;-1:-1:-1;;;;;97581:18:0;;97573:27;;;;;;97633:4;-1:-1:-1;;;;;97619:19:0;;;97611:28;;;;;;-1:-1:-1;;;;;103703:23:0;::::1;;::::0;;;:17:::1;:23;::::0;;;;;;;103741:10:::1;103703:59:::0;;;;;;;;:67:::1;::::0;103765:5;;103703:67:::1;:::i;:::-;-1:-1:-1::0;;;;;103665:23:0;::::1;;::::0;;;:17:::1;:23;::::0;;;;;;;103689:10:::1;103665:35:::0;;;;;;;:105;;;;103837:24:::1;103855:5:::0;103837:17:::1;:24::i;:::-;-1:-1:-1::0;;;;;103924:21:0;::::1;;::::0;;;:15:::1;:21;::::0;;;;;103815:46;;-1:-1:-1;103924:35:0::1;::::0;103815:46;;103924:35:::1;:::i;:::-;-1:-1:-1::0;;;;;103900:21:0;;::::1;;::::0;;;:15:::1;:21;::::0;;;;;:59;;;;103992:19;;::::1;::::0;;;;:33:::1;::::0;104014:11;;103992:33:::1;:::i;:::-;-1:-1:-1::0;;;;;103970:19:0;;::::1;;::::0;;;:15:::1;:19;::::0;;;;;;:55;;;;104045:25;;;;::::1;::::0;-1:-1:-1;;;;;;;;;;;104045:25:0;::::1;::::0;104064:5;643:25:1;;631:2;616:18;;497:177;104045:25:0::1;;;;;;;;-1:-1:-1::0;104090:4:0::1;::::0;103476:626;-1:-1:-1;;;;;103476:626:0:o;41471:181::-;41590:7;41622:12;;;;;;;;;;:22;;;;41471:181::o;41962:188::-;42081:18;42094:4;42081:12;:18::i;:::-;39414:16;39425:4;39414:10;:16::i;:::-;42117:25:::1;42128:4;42134:7;42117:10;:25::i;:::-;41962:188:::0;;;:::o;101726:440::-;101843:4;101821:2;-1:-1:-1;;;;;97581:18:0;;97573:27;;;;;;97633:4;-1:-1:-1;;;;;97619:19:0;;;97611:28;;;;;;101950:10:::1;101934:27;::::0;;;:15:::1;:27;::::0;;;;;:35:::1;::::0;101964:5;;101934:35:::1;:::i;:::-;101920:10;101904:27;::::0;;;:15:::1;:27;::::0;;;;;:65;;;;-1:-1:-1;;;;;102043:19:0;::::1;::::0;;;;:27:::1;::::0;102065:5;;102043:27:::1;:::i;:::-;-1:-1:-1::0;;;;;102021:19:0;::::1;;::::0;;;:15:::1;:19;::::0;;;;:49;;;;102095:10:::1;-1:-1:-1::0;;;;;;;;;;;102111:24:0::1;102129:5:::0;102111:17:::1;:24::i;:::-;102086:50;::::0;643:25:1;;;631:2;616:18;102086:50:0::1;;;;;;;;-1:-1:-1::0;102154:4:0::1;::::0;101726:440;-1:-1:-1;;;101726:440:0:o;43188:287::-;-1:-1:-1;;;;;43330:23:0;;36768:10;43330:23;43308:120;;;;-1:-1:-1;;;43308:120:0;;6202:2:1;43308:120:0;;;6184:21:1;6241:2;6221:18;;;6214:30;6280:34;6260:18;;;6253:62;-1:-1:-1;;;6331:18:1;;;6324:45;6386:19;;43308:120:0;;;;;;;;;43441:26;43453:4;43459:7;43441:11;:26::i;:::-;43188:287;;:::o;106428:419::-;106625:10;106544:4;106607:29;;;:17;:29;;;;;;;;-1:-1:-1;;;;;106607:62:0;;;;;;;;;;:75;;106672:10;;106607:75;:::i;:::-;106584:10;106566:29;;;;:17;:29;;;;;;;;-1:-1:-1;;;;;106566:38:0;;;;;;;;;;;;:116;;;106698:119;643:25:1;;;106566:38:0;;-1:-1:-1;;;;;;;;;;;106698:119:0;616:18:1;106698:119:0;497:177:1;98775:205:0;98835:4;98860:34;-1:-1:-1;;;;;;;;;;;36768:10:0;39894:197;:::i;98860:34::-;98852:68;;;;-1:-1:-1;;;98852:68:0;;;;;;;:::i;:::-;98933:17;98939:2;98943:6;98933:5;:17::i;:::-;-1:-1:-1;98968:4:0;98775:205;;;;:::o;99816:78::-;99873:13;99879:6;99873:5;:13::i;:::-;99816:78;:::o;104223:136::-;-1:-1:-1;;;;;104330:20:0;;104285:7;104330:20;;;:15;:20;;;;;;104312:39;;:17;:39::i;50169:103::-;49407:13;:11;:13::i;:::-;50234:30:::1;50261:1;50234:18;:30::i;:::-;50169:103::o:0;82353:164::-;82430:46;82446:7;36768:10;82469:6;82430:15;:46::i;:::-;82487:22;82493:7;82502:6;82487:5;:22::i;108736:1426::-;108852:7;108880:35;-1:-1:-1;;;;;;;;;;;36768:10:0;39894:197;:::i;108880:35::-;108872:70;;;;-1:-1:-1;;;108872:70:0;;6968:2:1;108872:70:0;;;6950:21:1;7007:2;6987:18;;;6980:30;-1:-1:-1;;;7026:18:1;;;7019:52;7088:18;;108872:70:0;6766:346:1;108872:70:0;108981:10;108995:1;108981:15;108977:142;;-1:-1:-1;;;;;;;;;;;109025:5:0;109032:19;;109053;;109018:55;;;;;;;;:::i;:::-;;;;;;;;-1:-1:-1;109095:12:0;;109088:19;;108977:142;109188:19;;109225:8;109220:547;;96531:6;109352:17;109359:10;96531:6;109352:17;:::i;:::-;109329:19;;:41;;;;:::i;:::-;:48;;;;:::i;:::-;109307:19;:70;109220:547;;;109467:24;96531:6;109517:17;109524:10;96531:6;109517:17;:::i;:::-;109494:19;;:41;;;;:::i;:::-;:48;;;;:::i;:::-;109467:75;;109580:19;:17;:19::i;:::-;109561:16;:38;109557:199;;;109620:19;:38;;;109557:199;;;109721:19;:17;:19::i;:::-;109699;:41;109557:199;109395:372;109220:547;109837:29;109855:10;;109837:17;:29::i;:::-;109822:12;:44;109914:12;;-1:-1:-1;;;;;109914:12:0;:26;109911:137;;109970:12;;109956:80;;-1:-1:-1;;;109956:80:0;;109996:10;109956:80;;;8061:51:1;8128:18;;;8121:34;;;8171:18;;;8164:34;;;8241:14;;8234:22;8214:18;;;8207:50;-1:-1:-1;;;;;109970:12:0;;;;109956:39;;8033:19:1;;109956:80:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;109911:137;-1:-1:-1;;;;;;;;;;;110072:5:0;110079:23;110104:19;;110065:59;;;;;;;;:::i;:::-;;;;;;;;-1:-1:-1;;110142:12:0;;108736:1426;;;;;;:::o;49521:87::-;49594:6;;-1:-1:-1;;;;;49594:6:0;;49521:87::o;47042:203::-;47177:7;47209:18;;;:12;:18;;;;;:28;;47231:5;47209:21;:28::i;100555:223::-;100623:4;100648:34;-1:-1:-1;;;;;;;;;;;36768:10:0;39894:197;:::i;100648:34::-;100640:68;;;;-1:-1:-1;;;100640:68:0;;;;;;;:::i;:::-;100721:27;100737:2;100741:6;100721:15;:27::i;39894:197::-;40025:4;40054:12;;;;;;;;;;;-1:-1:-1;;;;;40054:29:0;;;;;;;;;;;;;;;39894:197::o;69975:104::-;70031:13;70064:7;70057:14;;;;;:::i;107109:577::-;107289:10;107230:4;107271:29;;;:17;:29;;;;;;;;-1:-1:-1;;;;;107271:38:0;;;;;;;;;;107324:27;;;107320:202;;107386:10;107409:1;107368:29;;;:17;:29;;;;;;;;-1:-1:-1;;;;;107368:38:0;;;;;;;;;:42;107320:202;;;107484:26;107495:15;107484:8;:26;:::i;:::-;107461:10;107443:29;;;;:17;:29;;;;;;;;-1:-1:-1;;;;;107443:38:0;;;;;;;;;:67;107320:202;107560:10;107607:29;;;;:17;:29;;;;;;;;-1:-1:-1;;;;;107537:119:0;;107607:38;;;;;;;;;;;107537:119;;643:25:1;;;107537:119:0;;107560:10;-1:-1:-1;;;;;;;;;;;107537:119:0;616:18:1;107537:119:0;497:177:1;102429:785:0;102554:4;102532:2;-1:-1:-1;;;;;97581:18:0;;97573:27;;;;;;97633:4;-1:-1:-1;;;;;97619:19:0;;;97611:28;;;;;;102857:19:::1;102879:24;102897:5;102879:17;:24::i;:::-;103001:10;102985:27;::::0;;;:15:::1;:27;::::0;;;;;102857:46;;-1:-1:-1;102985:41:0::1;::::0;102857:46;;102985:41:::1;:::i;:::-;102971:10;102955:27;::::0;;;:15:::1;:27;::::0;;;;;:71;;;;-1:-1:-1;;;;;103100:19:0;::::1;::::0;;;;:33:::1;::::0;103122:11;;103100:33:::1;:::i;:::-;-1:-1:-1::0;;;;;103078:19:0;::::1;;::::0;;;:15:::1;:19;::::0;;;;;;:55;;;;103151:31;;103160:10:::1;::::0;-1:-1:-1;;;;;;;;;;;103151:31:0;::::1;::::0;103176:5;643:25:1;;631:2;616:18;;497:177;103151:31:0::1;;;;;;;;-1:-1:-1::0;103202:4:0::1;::::0;102429:785;-1:-1:-1;;;;102429:785:0:o;47419:192::-;47544:7;47576:18;;;:12;:18;;;;;:27;;:25;:27::i;111015:112::-;49407:13;:11;:13::i;:::-;111091:12:::1;:28:::0;;-1:-1:-1;;;;;;111091:28:0::1;-1:-1:-1::0;;;;;111091:28:0;;;::::1;::::0;;;::::1;::::0;;111015:112::o;110762:245::-;110887:4;49407:13;:11;:13::i;:::-;110928:49:::1;110958:5;110966:2;110970:6;110928:22;:49::i;:::-;-1:-1:-1::0;110995:4:0::1;110762:245:::0;;;;;:::o;107731:997::-;107958:8;107939:15;:27;;107931:61;;;;-1:-1:-1;;;107931:61:0;;8470:2:1;107931:61:0;;;8452:21:1;8509:2;8489:18;;;8482:30;-1:-1:-1;;;8528:18:1;;;8521:51;8589:18;;107931:61:0;8268:345:1;107931:61:0;108110:16;;-1:-1:-1;;;;;108354:13:0;;108005:14;108354:13;;;:6;:13;;;;;:15;;108005:14;;108110:16;-1:-1:-1;;;;;;;;;;;97005:66:0;108256:5;;108288:7;;108322:5;;108354:15;108005:14;108354:15;;;:::i;:::-;;;;-1:-1:-1;108177:250:0;;;;;;9045:25:1;;;;-1:-1:-1;;;;;9144:15:1;;;9124:18;;;9117:43;9196:15;;;;9176:18;;;9169:43;9228:18;;;9221:34;9271:19;;;9264:35;9315:19;;;9308:35;;;9017:19;;108177:250:0;;;;;;;;;;;;108145:301;;;;;;108046:415;;;;;;;;-1:-1:-1;;;9612:27:1;;9664:1;9655:11;;9648:27;;;;9700:2;9691:12;;9684:28;9737:2;9728:12;;9354:392;108046:415:0;;;;-1:-1:-1;;108046:415:0;;;;;;;;;108022:450;;108046:415;108022:450;;;;;-1:-1:-1;;;;;;108493:19:0;;108485:56;;;;-1:-1:-1;;;108485:56:0;;9953:2:1;108485:56:0;;;9935:21:1;9992:2;9972:18;;;9965:30;-1:-1:-1;;;10011:18:1;;;10004:54;10075:18;;108485:56:0;9751:348:1;108485:56:0;108569:26;;;;;;;;;;;;10331:25:1;;;10404:4;10392:17;;10372:18;;;10365:45;;;;10426:18;;;10419:34;;;10469:18;;;10462:34;;;108569:26:0;;10303:19:1;;108569:26:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;108560:35:0;:5;-1:-1:-1;;;;;108560:35:0;;108552:69;;;;-1:-1:-1;;;108552:69:0;;10709:2:1;108552:69:0;;;10691:21:1;10748:2;10728:18;;;10721:30;-1:-1:-1;;;10767:18:1;;;10760:51;10828:18;;108552:69:0;10507:345:1;108552:69:0;-1:-1:-1;;;;;108632:24:0;;;;;;;:17;:24;;;;;;;;:33;;;;;;;;;;;;;:41;;;108689:31;;643:25:1;;;-1:-1:-1;;;;;;;;;;;108689:31:0;616:18:1;108689:31:0;;;;;;;107920:808;107731:997;;;;;;;:::o;42443:190::-;42563:18;42576:4;42563:12;:18::i;:::-;39414:16;39425:4;39414:10;:16::i;:::-;42599:26:::1;42611:4;42617:7;42599:11;:26::i;104970:192::-:0;-1:-1:-1;;;;;105120:25:0;;;105088:7;105120:25;;;:17;:25;;;;;;;;:34;;;;;;;;;;;;;104970:192::o;50427:238::-;49407:13;:11;:13::i;:::-;-1:-1:-1;;;;;50530:22:0;::::1;50508:110;;;::::0;-1:-1:-1;;;50508:110:0;;11059:2:1;50508:110:0::1;::::0;::::1;11041:21:1::0;11098:2;11078:18;;;11071:30;11137:34;11117:18;;;11110:62;-1:-1:-1;;;11188:18:1;;;11181:36;11234:19;;50508:110:0::1;10857:402:1::0;50508:110:0::1;50629:28;50648:8;50629:18;:28::i;44854:238::-:0;44938:22;44946:4;44952:7;44938;:22::i;:::-;44933:152;;44977:6;:12;;;;;;;;;;;-1:-1:-1;;;;;44977:29:0;;;;;;;;;:36;;-1:-1:-1;;44977:36:0;45009:4;44977:36;;;45060:12;36768:10;;36688:98;45060:12;-1:-1:-1;;;;;45033:40:0;45051:7;-1:-1:-1;;;;;45033:40:0;45045:4;45033:40;;;;;;;;;;44854:238;;:::o;8646:175::-;8734:4;8763:50;8768:3;-1:-1:-1;;;;;8788:23:0;;8763:4;:50::i;39522:280::-;39652:4;-1:-1:-1;;;;;;39694:47:0;;-1:-1:-1;;;39694:47:0;;:100;;-1:-1:-1;;;;;;;;;;15741:40:0;;;39758:36;15582:207;98341:317;98393:7;98640:10;;-1:-1:-1;;98618:32:0;;;;:::i;110586:146::-;110705:19;;110651:7;;110678:24;96425:6;110678:5;:24;:::i;:::-;:46;;;;:::i;110430:148::-;110496:7;96425:6;110532:19;;110523:6;:28;;;;:::i;40395:105::-;40462:30;40473:4;36768:10;40462;:30::i;47704:201::-;47824:31;47841:4;47847:7;47824:16;:31::i;:::-;47866:18;;;;:12;:18;;;;;:31;;47889:7;47866:22;:31::i;47999:206::-;48120:32;48138:4;48144:7;48120:17;:32::i;:::-;48163:18;;;;:12;:18;;;;;:34;;48189:7;48163:25;:34::i;98988:698::-;99125:6;99110:12;;:21;;;;:::i;:::-;99095:12;:36;99177:19;99199:25;99217:6;99199:17;:25::i;:::-;99177:47;;99295:11;99282:10;;:24;;;;:::i;:::-;99269:10;:37;99431:19;:17;:19::i;:::-;99408;;:42;;99386:118;;;;-1:-1:-1;;;99386:118:0;;;;;;;:::i;:::-;-1:-1:-1;;;;;99563:19:0;;;;;;:15;:19;;;;;;:33;;99585:11;;99563:33;:::i;:::-;-1:-1:-1;;;;;99541:19:0;;;;;;:15;:19;;;;;;;:55;;;;99614:16;-1:-1:-1;;;;;;;;;;;99614:16:0;;;99557:2;;99623:6;;99614:16;:::i;:::-;;;;;;;;99646:32;;643:25:1;;;-1:-1:-1;;;;;99646:32:0;;;99663:1;;-1:-1:-1;;;;;;;;;;;99646:32:0;631:2:1;616:18;99646:32:0;;;;;;;;99049:637;98988:698;;:::o;99902:512::-;100016:6;100001:12;;:21;;;;:::i;:::-;99986:12;:36;100068:19;100090:25;100108:6;100090:17;:25::i;:::-;100068:47;;100186:11;100173:10;;:24;;;;:::i;:::-;100160:10;:37;100285:10;100269:27;;;;:15;:27;;;;;;:41;;100299:11;;100269:41;:::i;:::-;100255:10;100239:27;;;;:15;:27;;;;;;;:71;;;;100326:24;;;;;;100343:6;;100326:24;:::i;:::-;;;;;;;;100366:40;;643:25:1;;;100395:1:0;;100375:10;;-1:-1:-1;;;;;;;;;;;100366:40:0;631:2:1;616:18;100366:40:0;;;;;;;99942:472;99902:512;:::o;49686:132::-;36768:10;49750:7;:5;:7::i;:::-;-1:-1:-1;;;;;49750:23:0;;49742:68;;;;-1:-1:-1;;;49742:68:0;;12100:2:1;49742:68:0;;;12082:21:1;;;12119:18;;;12112:30;12178:34;12158:18;;;12151:62;12230:18;;49742:68:0;11898:356:1;50825:191:0;50918:6;;;-1:-1:-1;;;;;50935:17:0;;;-1:-1:-1;;;;;;50935:17:0;;;;;;;50968:40;;50918:6;;;50935:17;50918:6;;50968:40;;50899:16;;50968:40;50888:128;50825:191;:::o;79351:502::-;79486:24;79513:25;79523:5;79530:7;79513:9;:25::i;:::-;79486:52;;-1:-1:-1;;79553:16:0;:37;79549:297;;79653:6;79633:16;:26;;79607:117;;;;-1:-1:-1;;;79607:117:0;;12461:2:1;79607:117:0;;;12443:21:1;12500:2;12480:18;;;12473:30;12539:31;12519:18;;;12512:59;12588:18;;79607:117:0;12259:353:1;79607:117:0;79768:51;79777:5;79784:7;79812:6;79793:16;:25;79768:8;:51::i;:::-;79475:378;79351:502;;;:::o;77567:675::-;-1:-1:-1;;;;;77651:21:0;;77643:67;;;;-1:-1:-1;;;77643:67:0;;12819:2:1;77643:67:0;;;12801:21:1;12858:2;12838:18;;;12831:30;12897:34;12877:18;;;12870:62;-1:-1:-1;;;12948:18:1;;;12941:31;12989:19;;77643:67:0;12617:397:1;77643:67:0;-1:-1:-1;;;;;77810:18:0;;77785:22;77810:18;;;:9;:18;;;;;;77847:24;;;;77839:71;;;;-1:-1:-1;;;77839:71:0;;13221:2:1;77839:71:0;;;13203:21:1;13260:2;13240:18;;;13233:30;13299:34;13279:18;;;13272:62;-1:-1:-1;;;13350:18:1;;;13343:32;13392:19;;77839:71:0;13019:398:1;77839:71:0;-1:-1:-1;;;;;77946:18:0;;;;;;:9;:18;;;;;;;;77967:23;;;77946:44;;78085:12;:22;;;;;;;78136:37;643:25:1;;;77946:18:0;;;-1:-1:-1;;;;;;;;;;;78136:37:0;616:18:1;78136:37:0;;;;;;;41962:188;;;:::o;10020:190::-;10121:7;10177:22;10181:3;10193:5;10177:3;:22::i;100786:702::-;100917:6;100904:10;;:19;;;;:::i;:::-;100891:10;:32;100967:20;100990:25;101008:6;100990:17;:25::i;:::-;100967:48;;101091:12;101076;;:27;;;;:::i;:::-;101061:12;:42;101228:19;:17;:19::i;:::-;101205;;:42;;101183:118;;;;-1:-1:-1;;;101183:118:0;;;;;;;:::i;:::-;-1:-1:-1;;;;;101360:19:0;;;;;;:15;:19;;;;;;:28;;101382:6;;101360:28;:::i;:::-;-1:-1:-1;;;;;101338:19:0;;;;;;:15;:19;;;;;;;:50;;;;101404:22;-1:-1:-1;;;;;;;;;;;101404:22:0;;;101354:2;;101413:12;;101404:22;:::i;:::-;;;;;;;;101442:38;;643:25:1;;;-1:-1:-1;;;;;101442:38:0;;;101459:1;;-1:-1:-1;;;;;;;;;;;101442:38:0;631:2:1;616:18;101442:38:0;497:177:1;9549:117:0;9612:7;9639:19;9647:3;4597:18;;4514:109;83854:248;83971:123;84005:5;84048:23;;;84073:2;84077:5;84025:58;;;;;;;;;:::i;:::-;;;;-1:-1:-1;;84025:58:0;;;;;;;;;;;;;;-1:-1:-1;;;;;84025:58:0;-1:-1:-1;;;;;;84025:58:0;;;;;;;;;;83971:19;:123::i;2171:414::-;2234:4;4396:19;;;:12;;;:19;;;;;;2251:327;;-1:-1:-1;2294:23:0;;;;;;;;:11;:23;;;;;;;;;;;;;2477:18;;2455:19;;;:12;;;:19;;;;;;:40;;;;2510:11;;2251:327;-1:-1:-1;2561:5:0;2554:12;;40790:492;40879:22;40887:4;40893:7;40879;:22::i;:::-;40874:401;;41067:28;41087:7;41067:19;:28::i;:::-;41168:38;41196:4;41203:2;41168:19;:38::i;:::-;40972:257;;;;;;;;;:::i;:::-;;;;-1:-1:-1;;40972:257:0;;;;;;;;;;-1:-1:-1;;;40918:345:0;;;;;;;:::i;45272:239::-;45356:22;45364:4;45370:7;45356;:22::i;:::-;45352:152;;;45427:5;45395:12;;;;;;;;;;;-1:-1:-1;;;;;45395:29:0;;;;;;;;;;:37;;-1:-1:-1;;45395:37:0;;;45452:40;36768:10;;45395:12;;45452:40;;45427:5;45452:40;45272:239;;:::o;8997:181::-;9088:4;9117:53;9125:3;-1:-1:-1;;;;;9145:23:0;;9117:7;:53::i;78680:380::-;-1:-1:-1;;;;;78816:19:0;;78808:68;;;;-1:-1:-1;;;78808:68:0;;14415:2:1;78808:68:0;;;14397:21:1;14454:2;14434:18;;;14427:30;14493:34;14473:18;;;14466:62;-1:-1:-1;;;14544:18:1;;;14537:34;14588:19;;78808:68:0;14213:400:1;78808:68:0;-1:-1:-1;;;;;78895:21:0;;78887:68;;;;-1:-1:-1;;;78887:68:0;;14820:2:1;78887:68:0;;;14802:21:1;14859:2;14839:18;;;14832:30;14898:34;14878:18;;;14871:62;-1:-1:-1;;;14949:18:1;;;14942:32;14991:19;;78887:68:0;14618:398:1;78887:68:0;-1:-1:-1;;;;;78968:18:0;;;;;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;:36;;;79020:32;;643:25:1;;;-1:-1:-1;;;;;;;;;;;79020:32:0;616:18:1;79020:32:0;497:177:1;4977:152:0;5071:7;5103:3;:11;;5115:5;5103:18;;;;;;;;:::i;:::-;;;;;;;;;5096:25;;4977:152;;;;:::o;87352:802::-;87776:23;87802:106;87844:4;87802:106;;;;;;;;;;;;;;;;;87810:5;-1:-1:-1;;;;;87802:27:0;;;:106;;;;;:::i;:::-;87923:17;;87776:132;;-1:-1:-1;87923:21:0;87919:228;;88038:10;88027:30;;;;;;;;;;;;:::i;:::-;88001:134;;;;-1:-1:-1;;;88001:134:0;;15605:2:1;88001:134:0;;;15587:21:1;15644:2;15624:18;;;15617:30;15683:34;15663:18;;;15656:62;-1:-1:-1;;;15734:18:1;;;15727:40;15784:19;;88001:134:0;15403:406:1;31233:151:0;31291:13;31324:52;-1:-1:-1;;;;;31336:22:0;;29356:2;30597:479;30699:13;30730:19;30762:10;30766:6;30762:1;:10;:::i;:::-;:14;;30775:1;30762:14;:::i;:::-;-1:-1:-1;;;;;30752:25:0;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;30752:25:0;;30730:47;;-1:-1:-1;;;30788:6:0;30795:1;30788:9;;;;;;;;:::i;:::-;;;;:15;-1:-1:-1;;;;;30788:15:0;;;;;;;;;-1:-1:-1;;;30814:6:0;30821:1;30814:9;;;;;;;;:::i;:::-;;;;:15;-1:-1:-1;;;;;30814:15:0;;;;;;;;-1:-1:-1;30845:9:0;30857:10;30861:6;30857:1;:10;:::i;:::-;:14;;30870:1;30857:14;:::i;:::-;30845:26;;30840:131;30877:1;30873;:5;30840:131;;;-1:-1:-1;;;30921:5:0;30929:3;30921:11;30912:21;;;;;;;:::i;:::-;;;;30900:6;30907:1;30900:9;;;;;;;;:::i;:::-;;;;:33;-1:-1:-1;;;;;30900:33:0;;;;;;;;-1:-1:-1;30958:1:0;30948:11;;;;;30880:3;;;:::i;:::-;;;30840:131;;;-1:-1:-1;30989:10:0;;30981:55;;;;-1:-1:-1;;;30981:55:0;;16289:2:1;30981:55:0;;;16271:21:1;;;16308:18;;;16301:30;16367:34;16347:18;;;16340:62;16419:18;;30981:55:0;16087:356:1;2761:1420:0;2827:4;2966:19;;;:12;;;:19;;;;;;3002:15;;2998:1176;;3377:21;3401:14;3414:1;3401:10;:14;:::i;:::-;3450:18;;3377:38;;-1:-1:-1;3430:17:0;;3450:22;;3471:1;;3450:22;:::i;:::-;3430:42;;3506:13;3493:9;:26;3489:405;;3540:17;3560:3;:11;;3572:9;3560:22;;;;;;;;:::i;:::-;;;;;;;;;3540:42;;3714:9;3685:3;:11;;3697:13;3685:26;;;;;;;;:::i;:::-;;;;;;;;;;;;:38;;;;3799:23;;;:12;;;:23;;;;;:36;;;3489:405;3975:17;;:3;;:17;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;4070:3;:12;;:19;4083:5;4070:19;;;;;;;;;;;4063:26;;;4113:4;4106:11;;;;;;;2998:1176;4157:5;4150:12;;;;;55257:229;55394:12;55426:52;55448:6;55456:4;55462:1;55465:12;55426:21;:52::i;:::-;55419:59;55257:229;-1:-1:-1;;;;55257:229:0:o;56473:612::-;56643:12;56715:5;56690:21;:30;;56668:118;;;;-1:-1:-1;;;56668:118:0;;16782:2:1;56668:118:0;;;16764:21:1;16821:2;16801:18;;;16794:30;16860:34;16840:18;;;16833:62;-1:-1:-1;;;16911:18:1;;;16904:36;16957:19;;56668:118:0;16580:402:1;56668:118:0;56798:12;56812:23;56839:6;-1:-1:-1;;;;;56839:11:0;56858:5;56879:4;56839:55;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;56797:97;;;;56925:152;56970:6;56995:7;57021:10;57050:12;56925:26;:152::i;:::-;56905:172;56473:612;-1:-1:-1;;;;;;;56473:612:0:o;59608:644::-;59793:12;59822:7;59818:427;;;59850:10;:17;59871:1;59850:22;59846:290;;-1:-1:-1;;;;;52602:19:0;;;60060:60;;;;-1:-1:-1;;;60060:60:0;;17468:2:1;60060:60:0;;;17450:21:1;17507:2;17487:18;;;17480:30;17546:31;17526:18;;;17519:59;17595:18;;60060:60:0;17266:353:1;60060:60:0;-1:-1:-1;60157:10:0;60150:17;;59818:427;60200:33;60208:10;60220:12;60978:17;;:21;60974:388;;61210:10;61204:17;61267:15;61254:10;61250:2;61246:19;61239:44;60974:388;61337:12;61330:20;;-1:-1:-1;;;61330:20:0;;;;;;;;:::i;14:286:1:-;72:6;125:2;113:9;104:7;100:23;96:32;93:52;;;141:1;138;131:12;93:52;167:23;;-1:-1:-1;;;;;;219:32:1;;209:43;;199:71;;266:1;263;256:12;679:258;751:1;761:113;775:6;772:1;769:13;761:113;;;851:11;;;845:18;832:11;;;825:39;797:2;790:10;761:113;;;892:6;889:1;886:13;883:48;;;-1:-1:-1;;927:1:1;909:16;;902:27;679:258::o;942:383::-;1091:2;1080:9;1073:21;1054:4;1123:6;1117:13;1166:6;1161:2;1150:9;1146:18;1139:34;1182:66;1241:6;1236:2;1225:9;1221:18;1216:2;1208:6;1204:15;1182:66;:::i;:::-;1309:2;1288:15;-1:-1:-1;;1284:29:1;1269:45;;;;1316:2;1265:54;;942:383;-1:-1:-1;;942:383:1:o;1330:173::-;1398:20;;-1:-1:-1;;;;;1447:31:1;;1437:42;;1427:70;;1493:1;1490;1483:12;1427:70;1330:173;;;:::o;1508:254::-;1576:6;1584;1637:2;1625:9;1616:7;1612:23;1608:32;1605:52;;;1653:1;1650;1643:12;1605:52;1676:29;1695:9;1676:29;:::i;:::-;1666:39;1752:2;1737:18;;;;1724:32;;-1:-1:-1;;;1508:254:1:o;1767:180::-;1826:6;1879:2;1867:9;1858:7;1854:23;1850:32;1847:52;;;1895:1;1892;1885:12;1847:52;-1:-1:-1;1918:23:1;;1767:180;-1:-1:-1;1767:180:1:o;2342:328::-;2419:6;2427;2435;2488:2;2476:9;2467:7;2463:23;2459:32;2456:52;;;2504:1;2501;2494:12;2456:52;2527:29;2546:9;2527:29;:::i;:::-;2517:39;;2575:38;2609:2;2598:9;2594:18;2575:38;:::i;:::-;2565:48;;2660:2;2649:9;2645:18;2632:32;2622:42;;2342:328;;;;;:::o;2860:254::-;2928:6;2936;2989:2;2977:9;2968:7;2964:23;2960:32;2957:52;;;3005:1;3002;2995:12;2957:52;3041:9;3028:23;3018:33;;3070:38;3104:2;3093:9;3089:18;3070:38;:::i;:::-;3060:48;;2860:254;;;;;:::o;3308:186::-;3367:6;3420:2;3408:9;3399:7;3395:23;3391:32;3388:52;;;3436:1;3433;3426:12;3388:52;3459:29;3478:9;3459:29;:::i;3499:118::-;3585:5;3578:13;3571:21;3564:5;3561:32;3551:60;;3607:1;3604;3597:12;3622:377;3696:6;3704;3712;3765:2;3753:9;3744:7;3740:23;3736:32;3733:52;;;3781:1;3778;3771:12;3733:52;3817:9;3804:23;3794:33;;3874:2;3863:9;3859:18;3846:32;3836:42;;3928:2;3917:9;3913:18;3900:32;3941:28;3963:5;3941:28;:::i;:::-;3988:5;3978:15;;;3622:377;;;;;:::o;4004:248::-;4072:6;4080;4133:2;4121:9;4112:7;4108:23;4104:32;4101:52;;;4149:1;4146;4139:12;4101:52;-1:-1:-1;;4172:23:1;;;4242:2;4227:18;;;4214:32;;-1:-1:-1;4004:248:1:o;4257:693::-;4368:6;4376;4384;4392;4400;4408;4416;4469:3;4457:9;4448:7;4444:23;4440:33;4437:53;;;4486:1;4483;4476:12;4437:53;4509:29;4528:9;4509:29;:::i;:::-;4499:39;;4557:38;4591:2;4580:9;4576:18;4557:38;:::i;:::-;4547:48;;4642:2;4631:9;4627:18;4614:32;4604:42;;4693:2;4682:9;4678:18;4665:32;4655:42;;4747:3;4736:9;4732:19;4719:33;4792:4;4785:5;4781:16;4774:5;4771:27;4761:55;;4812:1;4809;4802:12;4761:55;4257:693;;;;-1:-1:-1;4257:693:1;;;;4835:5;4887:3;4872:19;;4859:33;;-1:-1:-1;4939:3:1;4924:19;;;4911:33;;4257:693;-1:-1:-1;;4257:693:1:o;4955:260::-;5023:6;5031;5084:2;5072:9;5063:7;5059:23;5055:32;5052:52;;;5100:1;5097;5090:12;5052:52;5123:29;5142:9;5123:29;:::i;:::-;5113:39;;5171:38;5205:2;5194:9;5190:18;5171:38;:::i;5220:380::-;5299:1;5295:12;;;;5342;;;5363:61;;5417:4;5409:6;5405:17;5395:27;;5363:61;5470:2;5462:6;5459:14;5439:18;5436:38;5433:161;;5516:10;5511:3;5507:20;5504:1;5497:31;5551:4;5548:1;5541:15;5579:4;5576:1;5569:15;5433:161;;5220:380;;;:::o;5605:127::-;5666:10;5661:3;5657:20;5654:1;5647:31;5697:4;5694:1;5687:15;5721:4;5718:1;5711:15;5737:125;5777:4;5805:1;5802;5799:8;5796:34;;;5810:18;;:::i;:::-;-1:-1:-1;5847:9:1;;5737:125::o;5867:128::-;5907:3;5938:1;5934:6;5931:1;5928:13;5925:39;;;5944:18;;:::i;:::-;-1:-1:-1;5980:9:1;;5867:128::o;6416:345::-;6618:2;6600:21;;;6657:2;6637:18;;;6630:30;-1:-1:-1;;;6691:2:1;6676:18;;6669:51;6752:2;6737:18;;6416:345::o;7117:319::-;7319:25;;;7375:2;7360:18;;7353:34;;;;7418:2;7403:18;;7396:34;7307:2;7292:18;;7117:319::o;7441:168::-;7481:7;7547:1;7543;7539:6;7535:14;7532:1;7529:21;7524:1;7517:9;7510:17;7506:45;7503:71;;;7554:18;;:::i;:::-;-1:-1:-1;7594:9:1;;7441:168::o;7614:217::-;7654:1;7680;7670:132;;7724:10;7719:3;7715:20;7712:1;7705:31;7759:4;7756:1;7749:15;7787:4;7784:1;7777:15;7670:132;-1:-1:-1;7816:9:1;;7614:217::o;8618:135::-;8657:3;8678:17;;;8675:43;;8698:18;;:::i;:::-;-1:-1:-1;8745:1:1;8734:13;;8618:135::o;11264:350::-;11466:2;11448:21;;;11505:2;11485:18;;;11478:30;-1:-1:-1;;;11539:2:1;11524:18;;11517:56;11605:2;11590:18;;11264:350::o;11619:274::-;-1:-1:-1;;;;;11811:32:1;;;;11793:51;;11875:2;11860:18;;11853:34;11781:2;11766:18;;11619:274::o;13422:786::-;-1:-1:-1;;;13828:3:1;13821:38;13803:3;13888:6;13882:13;13904:62;13959:6;13954:2;13949:3;13945:12;13938:4;13930:6;13926:17;13904:62;:::i;:::-;-1:-1:-1;;;14025:2:1;13985:16;;;14017:11;;;14010:40;14075:13;;14097:63;14075:13;14146:2;14138:11;;14131:4;14119:17;;14097:63;:::i;:::-;14180:17;14199:2;14176:26;;13422:786;-1:-1:-1;;;;13422:786:1:o;15021:127::-;15082:10;15077:3;15073:20;15070:1;15063:31;15113:4;15110:1;15103:15;15137:4;15134:1;15127:15;15153:245;15220:6;15273:2;15261:9;15252:7;15248:23;15244:32;15241:52;;;15289:1;15286;15279:12;15241:52;15321:9;15315:16;15340:28;15362:5;15340:28;:::i;15814:127::-;15875:10;15870:3;15866:20;15863:1;15856:31;15906:4;15903:1;15896:15;15930:4;15927:1;15920:15;15946:136;15985:3;16013:5;16003:39;;16022:18;;:::i;:::-;-1:-1:-1;;;16058:18:1;;15946:136::o;16448:127::-;16509:10;16504:3;16500:20;16497:1;16490:31;16540:4;16537:1;16530:15;16564:4;16561:1;16554:15;16987:274;17116:3;17154:6;17148:13;17170:53;17216:6;17211:3;17204:4;17196:6;17192:17;17170:53;:::i;:::-;17239:16;;;;;16987:274;-1:-1:-1;;16987:274:1:o

ipfs://bf2b1cf2df5f697245328d831126ad2ee339c601e0435cafaf91b5d76d1f17a1