Contract 0xB9bBe9355828A1aD0e2d605480f969c6903Ad9e4

/**
 *Submitted for verification at FtmScan.com on 2022-01-24
*/

// File contracts/OpenZeppelin/GSN/Context.sol

// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File contracts/OpenZeppelin/access/Ownable.sol

pragma solidity >=0.4.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(
        address indexed previousOwner,
        address indexed newOwner
    );

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public onlyOwner {
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     */
    function _transferOwnership(address newOwner) internal {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File contracts/OpenZeppelin/token/ERC20/IERC20.sol

pragma solidity >=0.4.0;

interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the token decimals.
     */
    function decimals() external view returns (uint8);

    /**
     * @dev Returns the token symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the token name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the ERC token owner.
     */
    function getOwner() external view returns (address);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount)
        external
        returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address _owner, address spender)
        external
        view
        returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
}

// File contracts/OpenZeppelin/math/SafeMath.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File contracts/OpenZeppelin/utils/Address.sol

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(
            address(this).balance >= amount,
            "Address: insufficient balance"
        );

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{value: amount}("");
        require(
            success,
            "Address: unable to send value, recipient may have reverted"
        );
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return
            functionCallWithValue(
                target,
                data,
                value,
                "Address: low-level call with value failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(
            address(this).balance >= value,
            "Address: insufficient balance for call"
        );
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{value: value}(
            data
        );
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data)
        internal
        view
        returns (bytes memory)
    {
        return
            functionStaticCall(
                target,
                data,
                "Address: low-level static call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) private pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File contracts/OpenZeppelin/token/ERC20/ERC20.sol

pragma solidity >=0.4.0;

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-ERC20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, Ownable {
    using SafeMath for uint256;
    using Address for address;

    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the ERC token owner.
     */
    function getOwner() external view override returns (address) {
        return owner();
    }

    /**
     * @dev Returns the token name.
     */
    function name() public view override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the token decimals.
     */
    function decimals() public view override returns (uint8) {
        return _decimals;
    }

    /**
     * @dev Returns the token symbol.
     */
    function symbol() public view override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {ERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {ERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {ERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount)
        public
        override
        returns (bool)
    {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {ERC20-allowance}.
     */
    function allowance(address owner, address spender)
        public
        view
        override
        returns (uint256)
    {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {ERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount)
        public
        override
        returns (bool)
    {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {ERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for `sender`'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(
            sender,
            _msgSender(),
            _allowances[sender][_msgSender()].sub(
                amount,
                "ERC20: transfer amount exceeds allowance"
            )
        );
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {ERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue)
        public
        returns (bool)
    {
        _approve(
            _msgSender(),
            spender,
            _allowances[_msgSender()][spender].add(addedValue)
        );
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {ERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue)
        public
        returns (bool)
    {
        _approve(
            _msgSender(),
            spender,
            _allowances[_msgSender()][spender].sub(
                subtractedValue,
                "ERC20: decreased allowance below zero"
            )
        );
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _balances[sender] = _balances[sender].sub(
            amount,
            "ERC20: transfer amount exceeds balance"
        );
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal {
        require(account != address(0), "ERC20: mint to the zero address");

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal {
        require(account != address(0), "ERC20: burn from the zero address");

        _balances[account] = _balances[account].sub(
            amount,
            "ERC20: burn amount exceeds balance"
        );
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`.`amount` is then deducted
     * from the caller's allowance.
     *
     * See {_burn} and {_approve}.
     */
    function _burnFrom(address account, uint256 amount) internal {
        _burn(account, amount);
        _approve(
            account,
            _msgSender(),
            _allowances[account][_msgSender()].sub(
                amount,
                "ERC20: burn amount exceeds allowance"
            )
        );
    }
}

// File contracts/WigoToken.sol

pragma solidity 0.6.12;

// WigoToken
contract WigoToken is ERC20("WigoSwap Token", "WIGO") {
    uint256 private constant MAX_SUPPLY = 2000000000e18;
    uint256 public _totalMinted = 0;
    uint256 public _totalBurned = 0;
    address public treasuryAddr;

    event Mint(address indexed sender, address indexed to, uint256 amount);
    event Burn(address indexed sender, address indexed from, uint256 amount);

    constructor(address _treasuryAddr) public {
        treasuryAddr = _treasuryAddr;

        // Mints 160,000,000 WIGO (8%) for Airdrop, IDO and Seed Funders.
        _mint(treasuryAddr, 160000000e18);
        _totalMinted = _totalMinted.add(160000000e18);
        emit Mint(msg.sender, treasuryAddr, 160000000e18);
    }

    function maxSupply() public pure returns (uint256) {
        return MAX_SUPPLY;
    }

    function totalMinted() public view returns (uint256) {
        return _totalMinted;
    }

    function totalBurned() public view returns (uint256) {
        return _totalBurned;
    }

    /// @notice Must only be called by the owner (MasterFarmer).
    function mint(address _to, uint256 _amount) public onlyOwner {
        require(
            totalSupply().add(_amount) <= MAX_SUPPLY,
            "ERC20: minting more than maxSupply"
        );
        _mint(_to, _amount);
        _totalMinted = _totalMinted.add(_amount);
        emit Mint(msg.sender, _to, _amount);
    }

    /// @notice Burns only from treasury address. Must only be called by MasterFarmer.
    function burn(address _from, uint256 _amount) public onlyOwner {
        _burn(_from, _amount);
        _totalBurned = _totalBurned.add(_amount);
        emit Burn(msg.sender, _from, _amount);
    }
}

// File contracts/WigoBank.sol

pragma solidity 0.6.12;

// WigoBank
contract WigoBank is ERC20("WigoBank Token", "xWIGO") {
    // The WIGO TOKEN!
    WigoToken public wigo;

    event Mint(address indexed sender, address indexed to, uint256 amount);
    event Burn(address indexed sender, address indexed from, uint256 amount);

    constructor(WigoToken _wigo) public {
        wigo = _wigo;
    }

    /// @notice Must only be called by the owner (MasterFarmer).
    function mint(address _to, uint256 _amount) public onlyOwner {
        _mint(_to, _amount);
        emit Mint(msg.sender, _to, _amount);
    }

    /// @notice Must only be called by the owner (MasterFarmer).
    function burn(address _from, uint256 _amount) public onlyOwner {
        _burn(_from, _amount);
        emit Burn(msg.sender, _from, _amount);
    }

    // Safe wigo transfer function, just in case if rounding error causes pool to not have enough WIGOs.
    function safeWigoTransfer(address _to, uint256 _amount) public onlyOwner {
        uint256 wigoBal = wigo.balanceOf(address(this));
        if (_amount > wigoBal) {
            wigo.transfer(_to, wigoBal);
        } else {
            wigo.transfer(_to, _amount);
        }
    }
}

• CertiK- Jan 23rd, 2022 - Security Audit Report

[{"inputs":[{"internalType":"contract WigoToken","name":"_wigo","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Burn","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Mint","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_from","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"getOwner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"safeWigoTransfer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"wigo","outputs":[{"internalType":"contract WigoToken","name":"","type":"address"}],"stateMutability":"view","type":"function"}]

60806040523480156200001157600080fd5b50604051620019f3380380620019f3833981810160405260208110156200003757600080fd5b5051604080518082018252600e81526d2bb4b3b7a130b735902a37b5b2b760911b60208281019190915282518084019093526005835264785749474f60d81b908301529060006200008762000136565b600080546001600160a01b0319166001600160a01b0383169081178255604051929350917f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e0908290a3508151620000e69060049060208501906200013a565b508051620000fc9060059060208401906200013a565b5050600680546001600160a01b0390931661010002610100600160a81b031960ff19909416601217939093169290921790915550620001d6565b3390565b828054600181600116156101000203166002900490600052602060002090601f016020900481019282601f106200017d57805160ff1916838001178555620001ad565b82800160010185558215620001ad579182015b82811115620001ad57825182559160200191906001019062000190565b50620001bb929150620001bf565b5090565b5b80821115620001bb5760008155600101620001c0565b61180d80620001e66000396000f3fe608060405234801561001057600080fd5b50600436106101515760003560e01c806370a08231116100cd5780639dc29fac11610081578063a9059cbb11610066578063a9059cbb1461043e578063dd62ed3e14610477578063f2fde38b146104b257610151565b80639dc29fac146103cc578063a457c2d71461040557610151565b8063893d20e8116100b2578063893d20e8146103b45780638da5cb5b146103bc57806395d89b41146103c457610151565b806370a0823114610379578063715018a6146103ac57610151565b806328ec1e2911610124578063395093511161010957806339509351146102d657806340c10f191461030f57806353e856001461034857610151565b806328ec1e291461027d578063313ce567146102b857610151565b806306fdde0314610156578063095ea7b3146101d357806318160ddd1461022057806323b872dd1461023a575b600080fd5b61015e6104e5565b6040805160208082528351818301528351919283929083019185019080838360005b83811015610198578181015183820152602001610180565b50505050905090810190601f1680156101c55780820380516001836020036101000a031916815260200191505b509250505060405180910390f35b61020c600480360360408110156101e957600080fd5b5073ffffffffffffffffffffffffffffffffffffffff8135169060200135610599565b604080519115158252519081900360200190f35b6102286105b6565b60408051918252519081900360200190f35b61020c6004803603606081101561025057600080fd5b5073ffffffffffffffffffffffffffffffffffffffff8135811691602081013590911690604001356105bc565b6102b66004803603604081101561029357600080fd5b5073ffffffffffffffffffffffffffffffffffffffff813516906020013561065d565b005b6102c0610902565b6040805160ff9092168252519081900360200190f35b61020c600480360360408110156102ec57600080fd5b5073ffffffffffffffffffffffffffffffffffffffff813516906020013561090b565b6102b66004803603604081101561032557600080fd5b5073ffffffffffffffffffffffffffffffffffffffff8135169060200135610966565b610350610a52565b6040805173ffffffffffffffffffffffffffffffffffffffff9092168252519081900360200190f35b6102286004803603602081101561038f57600080fd5b503573ffffffffffffffffffffffffffffffffffffffff16610a73565b6102b6610a9b565b610350610b9b565b610350610baa565b61015e610bc6565b6102b6600480360360408110156103e257600080fd5b5073ffffffffffffffffffffffffffffffffffffffff8135169060200135610c45565b61020c6004803603604081101561041b57600080fd5b5073ffffffffffffffffffffffffffffffffffffffff8135169060200135610d31565b61020c6004803603604081101561045457600080fd5b5073ffffffffffffffffffffffffffffffffffffffff8135169060200135610da6565b6102286004803603604081101561048d57600080fd5b5073ffffffffffffffffffffffffffffffffffffffff81358116916020013516610dba565b6102b6600480360360208110156104c857600080fd5b503573ffffffffffffffffffffffffffffffffffffffff16610df2565b60048054604080516020601f60027fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff61010060018816150201909516949094049384018190048102820181019092528281526060939092909183018282801561058f5780601f106105645761010080835404028352916020019161058f565b820191906000526020600020905b81548152906001019060200180831161057257829003601f168201915b5050505050905090565b60006105ad6105a6610e8f565b8484610e93565b50600192915050565b60035490565b60006105c9848484610fda565b610653846105d5610e8f565b61064e856040518060600160405280602881526020016117216028913973ffffffffffffffffffffffffffffffffffffffff8a16600090815260026020526040812090610620610e8f565b73ffffffffffffffffffffffffffffffffffffffff16815260208101919091526040016000205491906111a1565b610e93565b5060019392505050565b610665610e8f565b60005473ffffffffffffffffffffffffffffffffffffffff9081169116146106ee57604080517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820181905260248201527f4f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e6572604482015290519081900360640190fd5b600654604080517f70a082310000000000000000000000000000000000000000000000000000000081523060048201529051600092610100900473ffffffffffffffffffffffffffffffffffffffff16916370a08231916024808301926020929190829003018186803b15801561076457600080fd5b505afa158015610778573d6000803e3d6000fd5b505050506040513d602081101561078e57600080fd5b505190508082111561084e57600654604080517fa9059cbb00000000000000000000000000000000000000000000000000000000815273ffffffffffffffffffffffffffffffffffffffff86811660048301526024820185905291516101009093049091169163a9059cbb916044808201926020929091908290030181600087803b15801561081c57600080fd5b505af1158015610830573d6000803e3d6000fd5b505050506040513d602081101561084657600080fd5b506108fd9050565b600654604080517fa9059cbb00000000000000000000000000000000000000000000000000000000815273ffffffffffffffffffffffffffffffffffffffff86811660048301526024820186905291516101009093049091169163a9059cbb916044808201926020929091908290030181600087803b1580156108d057600080fd5b505af11580156108e4573d6000803e3d6000fd5b505050506040513d60208110156108fa57600080fd5b50505b505050565b60065460ff1690565b60006105ad610918610e8f565b8461064e8560026000610929610e8f565b73ffffffffffffffffffffffffffffffffffffffff908116825260208083019390935260409182016000908120918c168152925290205490611252565b61096e610e8f565b60005473ffffffffffffffffffffffffffffffffffffffff9081169116146109f757604080517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820181905260248201527f4f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e6572604482015290519081900360640190fd5b610a0182826112cd565b60408051828152905173ffffffffffffffffffffffffffffffffffffffff84169133917fab8530f87dc9b59234c4623bf917212bb2536d647574c8e7e5da92c2ede0c9f89181900360200190a35050565b600654610100900473ffffffffffffffffffffffffffffffffffffffff1681565b73ffffffffffffffffffffffffffffffffffffffff1660009081526001602052604090205490565b610aa3610e8f565b60005473ffffffffffffffffffffffffffffffffffffffff908116911614610b2c57604080517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820181905260248201527f4f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e6572604482015290519081900360640190fd5b6000805460405173ffffffffffffffffffffffffffffffffffffffff909116907f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e0908390a3600080547fffffffffffffffffffffffff0000000000000000000000000000000000000000169055565b6000610ba5610baa565b905090565b60005473ffffffffffffffffffffffffffffffffffffffff1690565b60058054604080516020601f60027fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff61010060018816150201909516949094049384018190048102820181019092528281526060939092909183018282801561058f5780601f106105645761010080835404028352916020019161058f565b610c4d610e8f565b60005473ffffffffffffffffffffffffffffffffffffffff908116911614610cd657604080517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820181905260248201527f4f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e6572604482015290519081900360640190fd5b610ce082826113f4565b60408051828152905173ffffffffffffffffffffffffffffffffffffffff84169133917fbac40739b0d4ca32fa2d82fc91630465ba3eddd1598da6fca393b26fb63b94539181900360200190a35050565b60006105ad610d3e610e8f565b8461064e856040518060600160405280602581526020016117b36025913960026000610d68610e8f565b73ffffffffffffffffffffffffffffffffffffffff908116825260208083019390935260409182016000908120918d168152925290205491906111a1565b60006105ad610db3610e8f565b8484610fda565b73ffffffffffffffffffffffffffffffffffffffff918216600090815260026020908152604080832093909416825291909152205490565b610dfa610e8f565b60005473ffffffffffffffffffffffffffffffffffffffff908116911614610e8357604080517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820181905260248201527f4f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e6572604482015290519081900360640190fd5b610e8c81611532565b50565b3390565b73ffffffffffffffffffffffffffffffffffffffff8316610eff576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040180806020018281038252602481526020018061178f6024913960400191505060405180910390fd5b73ffffffffffffffffffffffffffffffffffffffff8216610f6b576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260228152602001806116d96022913960400191505060405180910390fd5b73ffffffffffffffffffffffffffffffffffffffff808416600081815260026020908152604080832094871680845294825291829020859055815185815291517f8c5be1e5ebec7d5bd14f71427d1e84f3dd0314c0f7b2291e5b200ac8c7c3b9259281900390910190a3505050565b73ffffffffffffffffffffffffffffffffffffffff8316611046576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040180806020018281038252602581526020018061176a6025913960400191505060405180910390fd5b73ffffffffffffffffffffffffffffffffffffffff82166110b2576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040180806020018281038252602381526020018061166e6023913960400191505060405180910390fd5b6110fc816040518060600160405280602681526020016116fb6026913973ffffffffffffffffffffffffffffffffffffffff861660009081526001602052604090205491906111a1565b73ffffffffffffffffffffffffffffffffffffffff80851660009081526001602052604080822093909355908416815220546111389082611252565b73ffffffffffffffffffffffffffffffffffffffff80841660008181526001602090815260409182902094909455805185815290519193928716927fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef92918290030190a3505050565b6000818484111561124a576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825283818151815260200191508051906020019080838360005b8381101561120f5781810151838201526020016111f7565b50505050905090810190601f16801561123c5780820380516001836020036101000a031916815260200191505b509250505060405180910390fd5b505050900390565b6000828201838110156112c657604080517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152601b60248201527f536166654d6174683a206164646974696f6e206f766572666c6f770000000000604482015290519081900360640190fd5b9392505050565b73ffffffffffffffffffffffffffffffffffffffff821661134f57604080517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152601f60248201527f45524332303a206d696e7420746f20746865207a65726f206164647265737300604482015290519081900360640190fd5b60035461135c9082611252565b60035573ffffffffffffffffffffffffffffffffffffffff821660009081526001602052604090205461138f9082611252565b73ffffffffffffffffffffffffffffffffffffffff831660008181526001602090815260408083209490945583518581529351929391927fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef9281900390910190a35050565b73ffffffffffffffffffffffffffffffffffffffff8216611460576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260218152602001806117496021913960400191505060405180910390fd5b6114aa816040518060600160405280602281526020016116916022913973ffffffffffffffffffffffffffffffffffffffff851660009081526001602052604090205491906111a1565b73ffffffffffffffffffffffffffffffffffffffff83166000908152600160205260409020556003546114dd908261162b565b60035560408051828152905160009173ffffffffffffffffffffffffffffffffffffffff8516917fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef9181900360200190a35050565b73ffffffffffffffffffffffffffffffffffffffff811661159e576040517f08c379a00000000000000000000000000000000000000000000000000000000081526004018080602001828103825260268152602001806116b36026913960400191505060405180910390fd5b6000805460405173ffffffffffffffffffffffffffffffffffffffff808516939216917f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e091a3600080547fffffffffffffffffffffffff00000000000000000000000000000000000000001673ffffffffffffffffffffffffffffffffffffffff92909216919091179055565b60006112c683836040518060400160405280601e81526020017f536166654d6174683a207375627472616374696f6e206f766572666c6f7700008152506111a156fe45524332303a207472616e7366657220746f20746865207a65726f206164647265737345524332303a206275726e20616d6f756e7420657863656564732062616c616e63654f776e61626c653a206e6577206f776e657220697320746865207a65726f206164647265737345524332303a20617070726f766520746f20746865207a65726f206164647265737345524332303a207472616e7366657220616d6f756e7420657863656564732062616c616e636545524332303a207472616e7366657220616d6f756e74206578636565647320616c6c6f77616e636545524332303a206275726e2066726f6d20746865207a65726f206164647265737345524332303a207472616e736665722066726f6d20746865207a65726f206164647265737345524332303a20617070726f76652066726f6d20746865207a65726f206164647265737345524332303a2064656372656173656420616c6c6f77616e63652062656c6f77207a65726fa2646970667358221220021c1263c6999d29bdd9a3a4079990cd5b668081618ddc4b1b8eba376c2b65ba64736f6c634300060c0033000000000000000000000000e992beab6659bff447893641a378fbbf031c5bd6

000000000000000000000000e992beab6659bff447893641a378fbbf031c5bd6

-----Decoded View---------------
Arg [0] : _wigo (address): 0xe992beab6659bff447893641a378fbbf031c5bd6

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 000000000000000000000000e992beab6659bff447893641a378fbbf031c5bd6

32068:1187:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;22280:92;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;23840:193;;;;;;;;;;;;;;;;-1:-1:-1;23840:193:0;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;22756:100;;;:::i;:::-;;;;;;;;;;;;;;;;24504:446;;;;;;;;;;;;;;;;-1:-1:-1;24504:446:0;;;;;;;;;;;;;;;;;;:::i;32966:286::-;;;;;;;;;;;;;;;;-1:-1:-1;32966:286:0;;;;;;;;;:::i;:::-;;22439:92;;;:::i;:::-;;;;;;;;;;;;;;;;;;;25358:283;;;;;;;;;;;;;;;;-1:-1:-1;25358:283:0;;;;;;;;;:::i;32482:145::-;;;;;;;;;;;;;;;;-1:-1:-1;32482:145:0;;;;;;;;;:::i;32153:21::-;;;:::i;:::-;;;;;;;;;;;;;;;;;;;22918:119;;;;;;;;;;;;;;;;-1:-1:-1;22918:119:0;;;;:::i;2770:140::-;;;:::i;22123:94::-;;;:::i;2128:79::-;;;:::i;22596:96::-;;;:::i;32701:151::-;;;;;;;;;;;;;;;;-1:-1:-1;32701:151:0;;;;;;;;;:::i;26143:383::-;;;;;;;;;;;;;;;;-1:-1:-1;26143:383:0;;;;;;;;;:::i;23249:199::-;;;;;;;;;;;;;;;;-1:-1:-1;23249:199:0;;;;;;;;;:::i;23510:184::-;;;;;;;;;;;;;;;;-1:-1:-1;23510:184:0;;;;;;;;;;;:::i;3065:109::-;;;;;;;;;;;;;;;;-1:-1:-1;3065:109:0;;;;:::i;22280:92::-;22359:5;22352:12;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;22326:13;;22352:12;;22359:5;;22352:12;;22359:5;22352:12;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;22280:92;:::o;23840:193::-;23942:4;23964:39;23973:12;:10;:12::i;:::-;23987:7;23996:6;23964:8;:39::i;:::-;-1:-1:-1;24021:4:0;23840:193;;;;:::o;22756:100::-;22836:12;;22756:100;:::o;24504:446::-;24636:4;24653:36;24663:6;24671:9;24682:6;24653:9;:36::i;:::-;24700:220;24723:6;24744:12;:10;:12::i;:::-;24771:138;24827:6;24771:138;;;;;;;;;;;;;;;;;:19;;;;;;;:11;:19;;;;;;24791:12;:10;:12::i;:::-;24771:33;;;;;;;;;;;;;-1:-1:-1;24771:33:0;;;:138;:37;:138::i;:::-;24700:8;:220::i;:::-;-1:-1:-1;24938:4:0;24504:446;;;;;:::o;32966:286::-;2350:12;:10;:12::i;:::-;2340:6;;:22;:6;;;:22;;;2332:67;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;33068:4:::1;::::0;:29:::1;::::0;;;;;33091:4:::1;33068:29;::::0;::::1;::::0;;;-1:-1:-1;;33068:4:0::1;::::0;::::1;;;::::0;:14:::1;::::0;:29;;;;;::::1;::::0;;;;;;;;:4;:29;::::1;;::::0;::::1;;;;::::0;::::1;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;::::0;::::1;;-1:-1:-1::0;33068:29:0;;-1:-1:-1;33112:17:0;;::::1;33108:137;;;33146:4;::::0;:27:::1;::::0;;;;;:4:::1;:27:::0;;::::1;;::::0;::::1;::::0;;;;;;;;;:4:::1;::::0;;::::1;::::0;;::::1;::::0;:13:::1;::::0;:27;;;;;::::1;::::0;;;;;;;;;-1:-1:-1;33146:4:0;:27;::::1;;::::0;::::1;;;;::::0;::::1;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;::::0;::::1;;-1:-1:-1::0;33108:137:0::1;::::0;-1:-1:-1;33108:137:0::1;;33206:4;::::0;:27:::1;::::0;;;;;:4:::1;:27:::0;;::::1;;::::0;::::1;::::0;;;;;;;;;:4:::1;::::0;;::::1;::::0;;::::1;::::0;:13:::1;::::0;:27;;;;;::::1;::::0;;;;;;;;;-1:-1:-1;33206:4:0;:27;::::1;;::::0;::::1;;;;::::0;::::1;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;::::0;::::1;;-1:-1:-1::0;;33108:137:0::1;2410:1;32966:286:::0;;:::o;22439:92::-;22514:9;;;;22439:92;:::o;25358:283::-;25456:4;25478:133;25501:12;:10;:12::i;:::-;25528:7;25550:50;25589:10;25550:11;:25;25562:12;:10;:12::i;:::-;25550:25;;;;;;;;;;;;;;;;;;-1:-1:-1;25550:25:0;;;:34;;;;;;;;;;;:38;:50::i;32482:145::-;2350:12;:10;:12::i;:::-;2340:6;;:22;:6;;;:22;;;2332:67;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;32554:19:::1;32560:3;32565:7;32554:5;:19::i;:::-;32589:30;::::0;;;;;;;::::1;::::0;::::1;::::0;32594:10:::1;::::0;32589:30:::1;::::0;;;;::::1;::::0;;::::1;32482:145:::0;;:::o;32153:21::-;;;;;;;;;:::o;22918:119::-;23011:18;;22984:7;23011:18;;;:9;:18;;;;;;;22918:119::o;2770:140::-;2350:12;:10;:12::i;:::-;2340:6;;:22;:6;;;:22;;;2332:67;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;2869:1:::1;2853:6:::0;;2832:40:::1;::::0;::::1;2853:6:::0;;::::1;::::0;2832:40:::1;::::0;2869:1;;2832:40:::1;2900:1;2883:19:::0;;;::::1;::::0;;2770:140::o;22123:94::-;22175:7;22202;:5;:7::i;:::-;22195:14;;22123:94;:::o;2128:79::-;2166:7;2193:6;;;2128:79;:::o;22596:96::-;22677:7;22670:14;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;22644:13;;22670:14;;22677:7;;22670:14;;22677:7;22670:14;;;;;;;;;;;;;;;;;;;;;;;;32701:151;2350:12;:10;:12::i;:::-;2340:6;;:22;:6;;;:22;;;2332:67;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;32775:21:::1;32781:5;32788:7;32775:5;:21::i;:::-;32812:32;::::0;;;;;;;::::1;::::0;::::1;::::0;32817:10:::1;::::0;32812:32:::1;::::0;;;;::::1;::::0;;::::1;32701:151:::0;;:::o;26143:383::-;26246:4;26268:228;26291:12;:10;:12::i;:::-;26318:7;26340:145;26397:15;26340:145;;;;;;;;;;;;;;;;;:11;:25;26352:12;:10;:12::i;:::-;26340:25;;;;;;;;;;;;;;;;;;-1:-1:-1;26340:25:0;;;:34;;;;;;;;;;;:145;:38;:145::i;23249:199::-;23354:4;23376:42;23386:12;:10;:12::i;:::-;23400:9;23411:6;23376:9;:42::i;23510:184::-;23659:18;;;;23627:7;23659:18;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;23510:184::o;3065:109::-;2350:12;:10;:12::i;:::-;2340:6;;:22;:6;;;:22;;;2332:67;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;3138:28:::1;3157:8;3138:18;:28::i;:::-;3065:109:::0;:::o;661:106::-;749:10;661:106;:::o;29304:372::-;29432:19;;;29424:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;29511:21;;;29503:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;29584:18;;;;;;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;:36;;;29636:32;;;;;;;;;;;;;;;;;29304:372;;;:::o;27016:542::-;27148:20;;;27140:70;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;27229:23;;;27221:71;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;27325:108;27361:6;27325:108;;;;;;;;;;;;;;;;;:17;;;;;;;:9;:17;;;;;;;:108;:21;:108::i;:::-;27305:17;;;;;;;;:9;:17;;;;;;:128;;;;27467:20;;;;;;;:32;;27492:6;27467:24;:32::i;:::-;27444:20;;;;;;;;:9;:20;;;;;;;;;:55;;;;27515:35;;;;;;;27444:20;;27515:35;;;;;;;;;;;;;27016:542;;;:::o;8696:226::-;8816:7;8852:12;8844:6;;;;8836:29;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;8888:5:0;;;8696:226::o;7793:181::-;7851:7;7883:5;;;7907:6;;;;7899:46;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;7965:1;7793:181;-1:-1:-1;;;7793:181:0:o;27839:308::-;27915:21;;;27907:65;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;28000:12;;:24;;28017:6;28000:16;:24::i;:::-;27985:12;:39;28056:18;;;;;;;:9;:18;;;;;;:30;;28079:6;28056:22;:30::i;:::-;28035:18;;;;;;;:9;:18;;;;;;;;:51;;;;28102:37;;;;;;;28035:18;;;;28102:37;;;;;;;;;;27839:308;;:::o;28479:385::-;28555:21;;;28547:67;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;28648:105;28685:6;28648:105;;;;;;;;;;;;;;;;;:18;;;;;;;:9;:18;;;;;;;:105;:22;:105::i;:::-;28627:18;;;;;;;:9;:18;;;;;:126;28779:12;;:24;;28796:6;28779:16;:24::i;:::-;28764:12;:39;28819:37;;;;;;;;28845:1;;28819:37;;;;;;;;;;;;;28479:385;;:::o;3280:266::-;3368:22;;;3346:110;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;3493:6;;;3472:38;;;;;;;3493:6;;;3472:38;;;3521:6;:17;;;;;;;;;;;;;;;3280:266::o;8257:136::-;8315:7;8342:43;8346:1;8349;8342:43;;;;;;;;;;;;;;;;;:3;:43::i

ipfs://021c1263c6999d29bdd9a3a4079990cd5b668081618ddc4b1b8eba376c2b65ba