Contract 0x951cAc3a56314BfF6A75A731C171553447aC24b7 1

/**
 *Submitted for verification at FtmScan.com on 2021-12-02
*/

//SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}


interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the token decimals.
     */
    function decimals() external view returns (uint8);

    /**
     * @dev Returns the token symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the token name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the bep token owner.
     */
    function getOwner() external view returns (address);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address _owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}


contract ERC20 is Context, IERC20, Ownable {
    using SafeMath for uint256;
    using Address for address;

    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    uint256 public totalMinted;
    uint256 public constant maxMintCap = 15000 * (10 ** 18);

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the bep token owner.
     */
    function getOwner() external override view returns (address) {
        return owner();
    }

    /**
     * @dev Returns the token name.
     */
    function name() public override view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the token decimals.
     */
    function decimals() public override view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev Returns the token symbol.
     */
    function symbol() public override view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {ERC20-totalSupply}.
     */
    function totalSupply() public override view returns (uint256) {
        return _totalSupply;
    }

    function maxSupply() public  pure returns (uint256) {
        return maxMintCap;
    }

    /**
     * @dev See {ERC20-balanceOf}.
     */
    function balanceOf(address account) public override view returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {ERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {ERC20-allowance}.
     */
    function allowance(address owner, address spender) public override view returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {ERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {ERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for `sender`'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(
            sender,
            _msgSender(),
            _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance")
        );
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {ERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {ERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
        _approve(
            _msgSender(),
            spender,
            _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero")
        );
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal {
        require(account != address(0), "ERC20: mint to the zero address");
        require(totalMinted.add(amount) <= maxMintCap, "Max supply reached");
        
        _totalSupply = _totalSupply.add(amount);
        totalMinted = totalMinted.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

}

// Ghst.
contract Ghst is ERC20('Ghost', 'GHST') {
    
    //Pre-minting of X number of tokens for initial liquidity injection
    constructor () public {
        _mint(msg.sender, 400 * 10 ** 18);
    }

    address public masterchef;
    
    // @dev Throws if called by any account other than the Masterchef.
    modifier onlyMasterchef() {
        require(msg.sender == masterchef, "Caller is not the Masterchef");
        _;
    }
    
    /// @notice Creates `_amount` token to `_to`. Must only be called by the owner (MasterChef).
    function mint(address _to, uint256 _amount) public onlyMasterchef {
        _mint(_to, _amount);
    }

    function initializeMC(address _masterchef) public onlyOwner {
        require(masterchef == address(0), "Already initialized");
        require(_masterchef != address(0), "INCORRECT INPUT");
        require(_masterchef != address(msg.sender), "INCORRECT INPUT");
        require(_masterchef != address(this), "INCORRECT INPUT");
        
        masterchef = _masterchef;
        
    }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"getOwner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_masterchef","type":"address"}],"name":"initializeMC","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"masterchef","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"maxMintCap","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"maxSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalMinted","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

29408:1059:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;22807:92;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;24390:161;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;24390:161:0;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;23283:100;;;:::i;:::-;;;;;;;;;;;;;;;;25022:397;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;25022:397:0;;;;;;;;;;;;;;;;;:::i;22966:92::-;;;:::i;:::-;;;;;;;;;;;;;;;;;;;25827:210;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;25827:210:0;;;;;;;;:::i;30070:394::-;;;;;;;;;;;;;;;;-1:-1:-1;30070:394:0;-1:-1:-1;;;;;30070:394:0;;:::i;:::-;;29958:104;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;29958:104:0;;;;;;;;:::i;23541:119::-;;;;;;;;;;;;;;;;-1:-1:-1;23541:119:0;-1:-1:-1;;;;;23541:119:0;;:::i;9997:148::-;;;:::i;22049:55::-;;;:::i;22650:94::-;;;:::i;:::-;;;;-1:-1:-1;;;;;22650:94:0;;;;;;;;;;;;;;9346:87;;;:::i;23123:96::-;;;:::i;22016:26::-;;;:::i;26539:311::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;26539:311:0;;;;;;;;:::i;23872:167::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;23872:167:0;;;;;;;;:::i;23391:88::-;;;:::i;24101:143::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;24101:143:0;;;;;;;;;;:::i;10300:244::-;;;;;;;;;;;;;;;;-1:-1:-1;10300:244:0;-1:-1:-1;;;;;10300:244:0;;:::i;29616:25::-;;;:::i;22807:92::-;22886:5;22879:12;;;;;;;;-1:-1:-1;;22879:12:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;22853:13;;22879:12;;22886:5;;22879:12;;22886:5;22879:12;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;22807:92;:::o;24390:161::-;24465:4;24482:39;24491:12;:10;:12::i;:::-;24505:7;24514:6;24482:8;:39::i;:::-;-1:-1:-1;24539:4:0;24390:161;;;;:::o;23283:100::-;23363:12;;23283:100;:::o;25022:397::-;25154:4;25171:36;25181:6;25189:9;25200:6;25171:9;:36::i;:::-;25218:171;25241:6;25262:12;:10;:12::i;:::-;25289:89;25327:6;25289:89;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;25289:19:0;;;;;;:11;:19;;;;;;25309:12;:10;:12::i;:::-;-1:-1:-1;;;;;25289:33:0;;;;;;;;;;;;-1:-1:-1;25289:33:0;;;:89;:37;:89::i;:::-;25218:8;:171::i;:::-;-1:-1:-1;25407:4:0;25022:397;;;;;:::o;22966:92::-;23041:9;;;;22966:92;:::o;25827:210::-;25907:4;25924:83;25933:12;:10;:12::i;:::-;25947:7;25956:50;25995:10;25956:11;:25;25968:12;:10;:12::i;:::-;-1:-1:-1;;;;;25956:25:0;;;;;;;;;;;;;;;;;-1:-1:-1;25956:25:0;;;:34;;;;;;;;;;;:38;:50::i;30070:394::-;9577:12;:10;:12::i;:::-;-1:-1:-1;;;;;9566:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;9566:23:0;;9558:68;;;;;-1:-1:-1;;;9558:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;30149:10:::1;::::0;-1:-1:-1;;;;;30149:10:0::1;:24:::0;30141:56:::1;;;::::0;;-1:-1:-1;;;30141:56:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;-1:-1:-1;;;30141:56:0;;;;;;;;;;;;;::::1;;-1:-1:-1::0;;;;;30216:25:0;::::1;30208:53;;;::::0;;-1:-1:-1;;;30208:53:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;-1:-1:-1;;;30208:53:0;;;;;;;;;;;;;::::1;;-1:-1:-1::0;;;;;30280:34:0;::::1;30303:10;30280:34;;30272:62;;;::::0;;-1:-1:-1;;;30272:62:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;-1:-1:-1;;;30272:62:0;;;;;;;;;;;;;::::1;;-1:-1:-1::0;;;;;30353:28:0;::::1;30376:4;30353:28;;30345:56;;;::::0;;-1:-1:-1;;;30345:56:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;-1:-1:-1;;;30345:56:0;;;;;;;;;;;;;::::1;;30422:10;:24:::0;;-1:-1:-1;;;;;;30422:24:0::1;-1:-1:-1::0;;;;;30422:24:0;;;::::1;::::0;;;::::1;::::0;;30070:394::o;29958:104::-;29785:10;;-1:-1:-1;;;;;29785:10:0;29771;:24;29763:65;;;;;-1:-1:-1;;;29763:65:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;30035:19:::1;30041:3;30046:7;30035:5;:19::i;:::-;29958:104:::0;;:::o;23541:119::-;-1:-1:-1;;;;;23634:18:0;23607:7;23634:18;;;:9;:18;;;;;;;23541:119::o;9997:148::-;9577:12;:10;:12::i;:::-;-1:-1:-1;;;;;9566:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;9566:23:0;;9558:68;;;;;-1:-1:-1;;;9558:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;10104:1:::1;10088:6:::0;;10067:40:::1;::::0;-1:-1:-1;;;;;10088:6:0;;::::1;::::0;10067:40:::1;::::0;10104:1;;10067:40:::1;10135:1;10118:19:::0;;-1:-1:-1;;;;;;10118:19:0::1;::::0;;9997:148::o;22049:55::-;22086:18;22049:55;:::o;22650:94::-;22702:7;22729;:5;:7::i;:::-;22722:14;;22650:94;:::o;9346:87::-;9392:7;9419:6;-1:-1:-1;;;;;9419:6:0;9346:87;:::o;23123:96::-;23204:7;23197:14;;;;;;;;-1:-1:-1;;23197:14:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;23171:13;;23197:14;;23204:7;;23197:14;;23204:7;23197:14;;;;;;;;;;;;;;;;;;;;;;;;22016:26;;;;:::o;26539:311::-;26624:4;26641:179;26664:12;:10;:12::i;:::-;26691:7;26713:96;26752:15;26713:96;;;;;;;;;;;;;;;;;:11;:25;26725:12;:10;:12::i;:::-;-1:-1:-1;;;;;26713:25:0;;;;;;;;;;;;;;;;;-1:-1:-1;26713:25:0;;;:34;;;;;;;;;;;:96;:38;:96::i;23872:167::-;23950:4;23967:42;23977:12;:10;:12::i;:::-;23991:9;24002:6;23967:9;:42::i;23391:88::-;22086:18;23391:88;:::o;24101:143::-;-1:-1:-1;;;;;24209:18:0;;;24182:7;24209:18;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;24101:143::o;10300:244::-;9577:12;:10;:12::i;:::-;-1:-1:-1;;;;;9566:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;9566:23:0;;9558:68;;;;;-1:-1:-1;;;9558:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;10389:22:0;::::1;10381:73;;;;-1:-1:-1::0;;;10381:73:0::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;10491:6;::::0;;10470:38:::1;::::0;-1:-1:-1;;;;;10470:38:0;;::::1;::::0;10491:6;::::1;::::0;10470:38:::1;::::0;::::1;10519:6;:17:::0;;-1:-1:-1;;;;;;10519:17:0::1;-1:-1:-1::0;;;;;10519:17:0;;;::::1;::::0;;;::::1;::::0;;10300:244::o;29616:25::-;;;-1:-1:-1;;;;;29616:25:0;;:::o;3662:179::-;3720:7;3752:5;;;3776:6;;;;3768:46;;;;;-1:-1:-1;;;3768:46:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;3832:1;3662:179;-1:-1:-1;;;3662:179:0:o;604:106::-;692:10;604:106;:::o;29017:372::-;-1:-1:-1;;;;;29145:19:0;;29137:68;;;;-1:-1:-1;;;29137:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;29224:21:0;;29216:68;;;;-1:-1:-1;;;29216:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;29297:18:0;;;;;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;:36;;;29349:32;;;;;;;;;;;;;;;;;29017:372;;;:::o;27340:513::-;-1:-1:-1;;;;;27480:20:0;;27472:70;;;;-1:-1:-1;;;27472:70:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;27561:23:0;;27553:71;;;;-1:-1:-1;;;27553:71:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;27657;27679:6;27657:71;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;27657:17:0;;;;;;:9;:17;;;;;;;:71;:21;:71::i;:::-;-1:-1:-1;;;;;27637:17:0;;;;;;;:9;:17;;;;;;:91;;;;27762:20;;;;;;;:32;;27787:6;27762:24;:32::i;:::-;-1:-1:-1;;;;;27739:20:0;;;;;;;:9;:20;;;;;;;;;:55;;;;27810:35;;;;;;;27739:20;;27810:35;;;;;;;;;;;;;27340:513;;;:::o;6489:166::-;6575:7;6611:12;6603:6;;;;6595:29;;;;-1:-1:-1;;;6595:29:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;6642:5:0;;;6489:166::o;28134:443::-;-1:-1:-1;;;;;28210:21:0;;28202:65;;;;;-1:-1:-1;;;28202:65:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;28286:11;;22086:18;;28286:23;;28302:6;28286:15;:23::i;:::-;:37;;28278:68;;;;;-1:-1:-1;;;28278:68:0;;;;;;;;;;;;-1:-1:-1;;;28278:68:0;;;;;;;;;;;;;;;28382:12;;:24;;28399:6;28382:16;:24::i;:::-;28367:12;:39;28431:11;;:23;;28447:6;28431:15;:23::i;:::-;28417:11;:37;-1:-1:-1;;;;;28486:18:0;;;;;;:9;:18;;;;;;:30;;28509:6;28486:22;:30::i;:::-;-1:-1:-1;;;;;28465:18:0;;;;;;:9;:18;;;;;;;;:51;;;;28532:37;;;;;;;28465:18;;;;28532:37;;;;;;;;;;28134:443;;:::o

ipfs://621e528da717904ad0aa76eda107cab6144f3461c02d77545ca8ca07d2c5eb80