Contract 0x85c85647e1A79c2b8bc3Ed2B6a1DdE326eeC66c5 2

/**
 *Submitted for verification at FtmScan.com on 2021-05-03
*/

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: @openzeppelin/contracts/math/SafeMath.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin/contracts/utils/Address.sol

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin/contracts/token/ERC20/SafeERC20.sol

pragma solidity >=0.6.0 <0.8.0;




/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// File: @openzeppelin/contracts/utils/Context.sol

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin/contracts/access/Ownable.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File: @openzeppelin/contracts/token/ERC20/ERC20.sol

pragma solidity >=0.6.0 <0.8.0;




/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) public {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal virtual {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// File: contracts/HyperOrillium.sol

pragma solidity 0.6.12;



contract HyperOrillium is Ownable, ERC20('HyperOrillium', 'ORI') {
    // burn counter
    uint256 private _burnTotal;

    /// @notice Creates `_amount` token to `_to`. Must only be called by the owner.
    function mint(address _to, uint256 _amount) public onlyOwner {
        _mint(_to, _amount);
    }

    // burn logic
    function burn(uint256 amount) public {
        _burn(_msgSender(), amount);
        _burnTotal = _burnTotal.add(amount);
    }

    // interactive burn logic
    function burnFrom(address account, uint256 amount) public {
        uint256 decreasedAllowance = allowance(account, _msgSender()).sub(
            amount,
            'ERC20: burn amount exceeds allowance'
        );

        _approve(account, _msgSender(), decreasedAllowance);
        _burn(account, amount);
        _burnTotal = _burnTotal.add(amount);
    }

    // view total burnt orillium
    function totalOriBurned() public view returns (uint256) {
        return _burnTotal;
    }
}

// File: contracts/HyperOriMechs.sol

pragma solidity 0.6.12;




contract HyperMechs is Ownable, ERC20('HyperMechs', 'MECHS') {
    /// @notice Creates `_amount` token to `_to`. Must only be called by the owner (HyperCity).
    function mint(address _to, uint256 _amount) public onlyOwner {
        _mint(_to, _amount);
    }

    function burn(address _from ,uint256 _amount) public onlyOwner {
        _burn(_from, _amount);
    }

    // HyperOrillium
    HyperOrillium public ori;

    constructor(
        HyperOrillium _ori
    ) public {
        ori = _ori;
    }

    // Safe ori transfer function, just in case if rounding error causes pool to not have enough DRUGs.
    function safeOrilliumTransfer(address _to, uint256 _amount) public onlyOwner {
        uint256 oriBal = ori.balanceOf(address(this));
        if (_amount > oriBal) {
            ori.transfer(_to, oriBal);
        } else {
            ori.transfer(_to, _amount);
        }
    }
}

// File: contracts/HyperPlanet.sol

pragma solidity 0.6.12;







contract HyperPlanet is Ownable {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    // Info of each user.
    struct UserInfo {
        uint256 amount;     // How many LP tokens the user has provided.
        uint256 rewardDebt; // Reward debt. See explanation below.
        //
        // We do some fancy math here. Basically, any point in time, the amount of ORI
        // entitled to a user but is pending to be distributed is:
        //
        //   pending reward = (user.amount * pool.accOrilliumPerShare) - user.rewardDebt
        //
        // Whenever a user deposits or withdraws LP tokens to a pool. Here's what happens:
        //   1. The pool's `accOrilliumPerShare` (and `lastRewardTime`) gets updated.
        //   2. User receives the pending reward sent to his/her address.
        //   3. User's `amount` gets updated.
        //   4. User's `rewardDebt` gets updated.
    }

    // Info of each pool.
    struct PoolInfo {
        IERC20 lpToken;           // Address of LP token contract.
        uint256 allocPoint;       // How many allocation points assigned to this pool. ORI to distribute per block.
        uint256 lastRewardTime;  // Last timestamp that ORI distribution occurs.
        uint256 accOrilliumPerShare; // Accumulated ORI per share, times 1e12. See below.
    }

    // Hyper Tokens
    HyperOrillium public ori;
    HyperMechs public mechs;
    
    // farm parameters
    address public devAddr;
    address public lpFeeAddr;
    uint256 public oriPerSecond;
    uint256 public BONUS_MULTIPLIER = 1;

    // Info of each pool.
    PoolInfo[] public poolInfo;
    // Info of each user that stakes LP tokens.
    mapping (uint256 => mapping (address => UserInfo)) public userInfo;
    // Total allocation poitns. Must be the sum of all allocation points in all pools.
    uint256 public totalAllocPoint = 0;
    // The block number when ORI mining starts.
    uint256 public startTime;

    event Deposit(address indexed user, uint256 indexed pid, uint256 amount);
    event Withdraw(address indexed user, uint256 indexed pid, uint256 amount);
    event EmergencyWithdraw(address indexed user, uint256 indexed pid, uint256 amount);

    constructor(
        HyperOrillium _ori,
        HyperMechs _mechs,
        address _devAddr,
        address _lpFeeAddr,
        uint256 _oriPerSecond,
        uint256 _startTime
    ) public {
        ori = _ori;
        mechs = _mechs;
        devAddr = _devAddr;
        lpFeeAddr = _lpFeeAddr;
        oriPerSecond = _oriPerSecond;
        startTime = _startTime;

        // staking pool
        poolInfo.push(PoolInfo({
            lpToken: _ori,
            allocPoint: 1000,
            lastRewardTime: startTime,
            accOrilliumPerShare: 0
        }));

        totalAllocPoint = 1000;

    }

    function updateMultiplier(uint256 multiplierNumber) public onlyOwner {
        BONUS_MULTIPLIER = multiplierNumber;
    }

    function poolLength() external view returns (uint256) {
        return poolInfo.length;
    }

    function checkForDuplicate(IERC20 _lpToken) internal view {
        uint256 length = poolInfo.length;
        for (uint256 _pid = 0; _pid < length; _pid++) {
            require(poolInfo[_pid].lpToken != _lpToken, "add: pool already exists!!!!");
        }

    }

    // Add a new lp to the pool. Can only be called by the owner.
    function add(uint256 _allocPoint, IERC20 _lpToken, bool _withUpdate) public onlyOwner {
        if (_withUpdate) {
            massUpdatePools();
        }
        // check for duplicate pool
        checkForDuplicate(_lpToken);

        uint256 lastRewardTime = block.timestamp > startTime ? block.timestamp : startTime;
        totalAllocPoint = totalAllocPoint.add(_allocPoint);
        poolInfo.push(PoolInfo({
            lpToken: _lpToken,
            allocPoint: _allocPoint,
            lastRewardTime: lastRewardTime,
            accOrilliumPerShare: 0
        }));
        updateStakingPool();
    }

    // Update the given pool's ORI allocation point. Can only be called by the owner.
    function set(uint256 _pid, uint256 _allocPoint, bool _withUpdate) public onlyOwner {
        if (_withUpdate) {
            massUpdatePools();
        }
        totalAllocPoint = totalAllocPoint.sub(poolInfo[_pid].allocPoint).add(_allocPoint);
        uint256 prevAllocPoint = poolInfo[_pid].allocPoint;
        poolInfo[_pid].allocPoint = _allocPoint;
        if (prevAllocPoint != _allocPoint) {
            updateStakingPool();
        }
    }

    function updateStakingPool() internal {
        uint256 length = poolInfo.length;
        uint256 points = 0;
        for (uint256 pid = 1; pid < length; ++pid) {
            points = points.add(poolInfo[pid].allocPoint);
        }
        if (points != 0) {
            points = points.div(4);
            totalAllocPoint = totalAllocPoint.sub(poolInfo[0].allocPoint).add(points);
            poolInfo[0].allocPoint = points;
        }
    }

    // Return reward multiplier over the given _from to _to timestamp.
    function getMultiplier(uint256 _from, uint256 _to) public view returns (uint256) {
        _from = _from > startTime ? _from : startTime;
        if (_to < startTime) {
            return 0;
        }
        return _to - _from;
    }

    // View function to see pending ORI on frontend.
    function pendingOrillium(uint256 _pid, address _user) external view returns (uint256) {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][_user];
        uint256 accOrilliumPerShare = pool.accOrilliumPerShare;
        uint256 lpSupply = pool.lpToken.balanceOf(address(this));
        if (block.timestamp > pool.lastRewardTime && lpSupply != 0) {
            uint256 multiplier = getMultiplier(pool.lastRewardTime, block.timestamp);
            uint256 oriReward = multiplier.mul(oriPerSecond).mul(pool.allocPoint).div(totalAllocPoint);
            accOrilliumPerShare = accOrilliumPerShare.add(oriReward.mul(1e12).div(lpSupply));
        }
        return user.amount.mul(accOrilliumPerShare).div(1e12).sub(user.rewardDebt);
    }

    // Update reward variables for all pools. Be careful of gas spending!
    function massUpdatePools() public {
        uint256 length = poolInfo.length;
        for (uint256 pid = 0; pid < length; ++pid) {
            updatePool(pid);
        }
    }


    // Update reward variables of the given pool to be up-to-date.
    function updatePool(uint256 _pid) public {
        PoolInfo storage pool = poolInfo[_pid];
        if (block.timestamp <= pool.lastRewardTime) {
            return;
        }
        uint256 lpSupply = pool.lpToken.balanceOf(address(this));
        if (lpSupply == 0) {
            pool.lastRewardTime = block.timestamp;
            return;
        }
        uint256 multiplier = getMultiplier(pool.lastRewardTime, block.timestamp);
        uint256 oriReward = multiplier.mul(oriPerSecond).mul(pool.allocPoint).div(totalAllocPoint);
        ori.mint(devAddr, oriReward.div(10));
        ori.mint(address(mechs), oriReward);
        pool.accOrilliumPerShare = pool.accOrilliumPerShare.add(oriReward.mul(1e12).div(lpSupply));
        pool.lastRewardTime = block.timestamp;
    }

    // Deposit LP tokens to HyperPlanet for ORI allocation.
    function deposit(uint256 _pid, uint256 _amount) public {
        // ensure ori uses staking
        require (_pid != 0, 'deposit ORI by staking');
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        updatePool(_pid);
        if (user.amount > 0) {
            uint256 pending = user.amount.mul(pool.accOrilliumPerShare).div(1e12).sub(user.rewardDebt);
            if(pending > 0) {
                safeOrilliumTransfer(msg.sender, pending);
            }
        }
        if (_amount > 0) {
            uint256 lpFee = _amount.div(100);
            uint256 afterFee = _amount.sub(lpFee);
            pool.lpToken.safeTransferFrom(address(msg.sender), address(lpFeeAddr), lpFee);
            pool.lpToken.safeTransferFrom(address(msg.sender), address(this), afterFee);
            user.amount = user.amount.add(afterFee);

            user.rewardDebt = user.amount.mul(pool.accOrilliumPerShare).div(1e12);
            emit Deposit(msg.sender, _pid, afterFee);
        } else {
            user.rewardDebt = user.amount.mul(pool.accOrilliumPerShare).div(1e12);
            emit Deposit(msg.sender, _pid, _amount);
        }
    }

    // Withdraw LP tokens from HyperPlanet.
    function withdraw(uint256 _pid, uint256 _amount) public {
        // ensure ori uses staking
        require (_pid != 0, 'withdraw ORI by unstaking');
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        require(user.amount >= _amount, "withdraw: not good");

        updatePool(_pid);
        uint256 pending = user.amount.mul(pool.accOrilliumPerShare).div(1e12).sub(user.rewardDebt);
        if(pending > 0) {
            safeOrilliumTransfer(msg.sender, pending);
        }
        if(_amount > 0) {
            user.amount = user.amount.sub(_amount);
            pool.lpToken.safeTransfer(address(msg.sender), _amount);
        }
        user.rewardDebt = user.amount.mul(pool.accOrilliumPerShare).div(1e12);
        emit Withdraw(msg.sender, _pid, _amount);
    }

    // Stake ORI tokens to HyperPlanet
    function enterMechs(uint256 _amount) public {
        PoolInfo storage pool = poolInfo[0];
        UserInfo storage user = userInfo[0][msg.sender];
        updatePool(0);
        uint256 amountAfterRatio = _amount.div(5);
        uint256 sanitized = amountAfterRatio.mul(5);

        if (user.amount > 0) {
            uint256 pending = user.amount.mul(pool.accOrilliumPerShare).div(1e12).sub(user.rewardDebt);
            if(pending > 0) {
                safeOrilliumTransfer(msg.sender, pending);
            }
        }
        if(_amount > 0) {
            pool.lpToken.safeTransferFrom(address(msg.sender), address(this), sanitized);
            user.amount = user.amount.add(sanitized);
        }
        user.rewardDebt = user.amount.mul(pool.accOrilliumPerShare).div(1e12);
        
        mechs.mint(msg.sender, amountAfterRatio);
        emit Deposit(msg.sender, 0, sanitized);
    }

    // Withdraw ORI tokens from STAKING.
    function leaveMechs(uint256 _amount) public {
        PoolInfo storage pool = poolInfo[0];
        UserInfo storage user = userInfo[0][msg.sender];
        require(user.amount >= _amount.mul(5), "you don't have enough mechs");
        updatePool(0);
        uint256 pending = user.amount.mul(pool.accOrilliumPerShare).div(1e12).sub(user.rewardDebt);
        uint256 amountAfterRatio = _amount.mul(5);
        if(pending > 0) {
            safeOrilliumTransfer(msg.sender, pending);
        }
        if(_amount > 0) {
            user.amount = user.amount.sub(amountAfterRatio);
            pool.lpToken.safeTransfer(address(msg.sender), amountAfterRatio);
        }
        user.rewardDebt = user.amount.mul(pool.accOrilliumPerShare).div(1e12);
        
        mechs.burn(msg.sender, _amount);
        emit Withdraw(msg.sender, 0, amountAfterRatio);
    }

    // Withdraw without caring about rewards. EMERGENCY ONLY.
    function emergencyWithdraw(uint256 _pid) public {
        require (_pid != 0, "Use leaveMechs");
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        pool.lpToken.safeTransfer(address(msg.sender), user.amount);
        emit EmergencyWithdraw(msg.sender, _pid, user.amount);
        user.amount = 0;
        user.rewardDebt = 0;
    }

    // Safe ori transfer function, just in case if rounding error causes pool to not have enough ORI.
    function safeOrilliumTransfer(address _to, uint256 _amount) internal {
        mechs.safeOrilliumTransfer(_to, _amount);
    }

    // Update dev address
    function dev(address _devAddr) public onlyOwner {
        devAddr = _devAddr;
    }
    // Update LP Fee Address
    function lpFeeAddress(address _lpFeeAddr) public onlyOwner {
        lpFeeAddr = _lpFeeAddr;
    }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"contract HyperOrillium","name":"_ori","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_from","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"ori","outputs":[{"internalType":"contract HyperOrillium","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"safeOrilliumTransfer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

0000000000000000000000000575f8738efda7f512e3654f277c77e80c7d2725

-----Decoded View---------------
Arg [0] : _ori (address): 0x0575f8738efda7f512e3654f277c77e80c7d2725

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 0000000000000000000000000575f8738efda7f512e3654f277c77e80c7d2725

37504:922:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;27469:91;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;29615:169;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;29615:169:0;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;28568:108;;;:::i;:::-;;;;;;;;;;;;;;;;30266:321;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;30266:321:0;;;;;;;;;;;;;;;;;:::i;28412:91::-;;;:::i;:::-;;;;;;;;;;;;;;;;;;;37909:24;;;:::i;:::-;;;;-1:-1:-1;;;;;37909:24:0;;;;;;;;;;;;;;30996:218;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;30996:218:0;;;;;;;;:::i;37669:99::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;37669:99:0;;;;;;;;:::i;:::-;;28739:127;;;;;;;;;;;;;;;;-1:-1:-1;28739:127:0;-1:-1:-1;;;;;28739:127:0;;:::i;24751:148::-;;;:::i;24100:87::-;;;:::i;27679:95::-;;;:::i;37776:103::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;37776:103:0;;;;;;;;:::i;31717:269::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;31717:269:0;;;;;;;;:::i;29079:175::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;29079:175:0;;;;;;;;:::i;29317:151::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;29317:151:0;;;;;;;;;;:::i;38139:284::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;38139:284:0;;;;;;;;:::i;25054:244::-;;;;;;;;;;;;;;;;-1:-1:-1;25054:244:0;-1:-1:-1;;;;;25054:244:0;;:::i;27469:91::-;27547:5;27540:12;;;;;;;;-1:-1:-1;;27540:12:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;27514:13;;27540:12;;27547:5;;27540:12;;27547:5;27540:12;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;27469:91;:::o;29615:169::-;29698:4;29715:39;29724:12;:10;:12::i;:::-;29738:7;29747:6;29715:8;:39::i;:::-;-1:-1:-1;29772:4:0;29615:169;;;;:::o;28568:108::-;28656:12;;28568:108;:::o;30266:321::-;30372:4;30389:36;30399:6;30407:9;30418:6;30389:9;:36::i;:::-;30436:121;30445:6;30453:12;:10;:12::i;:::-;30467:89;30505:6;30467:89;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;30467:19:0;;;;;;:11;:19;;;;;;30487:12;:10;:12::i;:::-;-1:-1:-1;;;;;30467:33:0;;;;;;;;;;;;-1:-1:-1;30467:33:0;;;:89;:37;:89::i;:::-;30436:8;:121::i;:::-;-1:-1:-1;30575:4:0;30266:321;;;;;:::o;28412:91::-;28486:9;;;;28412:91;:::o;37909:24::-;;;;;;-1:-1:-1;;;;;37909:24:0;;:::o;30996:218::-;31084:4;31101:83;31110:12;:10;:12::i;:::-;31124:7;31133:50;31172:10;31133:11;:25;31145:12;:10;:12::i;:::-;-1:-1:-1;;;;;31133:25:0;;;;;;;;;;;;;;;;;-1:-1:-1;31133:25:0;;;:34;;;;;;;;;;;:38;:50::i;37669:99::-;24331:12;:10;:12::i;:::-;-1:-1:-1;;;;;24320:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;24320:23:0;;24312:68;;;;;-1:-1:-1;;;24312:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;37741:19:::1;37747:3;37752:7;37741:5;:19::i;:::-;37669:99:::0;;:::o;28739:127::-;-1:-1:-1;;;;;28840:18:0;28813:7;28840:18;;;:9;:18;;;;;;;28739:127::o;24751:148::-;24331:12;:10;:12::i;:::-;-1:-1:-1;;;;;24320:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;24320:23:0;;24312:68;;;;;-1:-1:-1;;;24312:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;24858:1:::1;24842:6:::0;;24821:40:::1;::::0;-1:-1:-1;;;;;24842:6:0;;::::1;::::0;24821:40:::1;::::0;24858:1;;24821:40:::1;24889:1;24872:19:::0;;-1:-1:-1;;24872:19:0::1;::::0;;24751:148::o;24100:87::-;24146:7;24173:6;-1:-1:-1;;;;;24173:6:0;24100:87;:::o;27679:95::-;27759:7;27752:14;;;;;;;;-1:-1:-1;;27752:14:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;27726:13;;27752:14;;27759:7;;27752:14;;27759:7;27752:14;;;;;;;;;;;;;;;;;;;;;;;;37776:103;24331:12;:10;:12::i;:::-;-1:-1:-1;;;;;24320:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;24320:23:0;;24312:68;;;;;-1:-1:-1;;;24312:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;37850:21:::1;37856:5;37863:7;37850:5;:21::i;31717:269::-:0;31810:4;31827:129;31836:12;:10;:12::i;:::-;31850:7;31859:96;31898:15;31859:96;;;;;;;;;;;;;;;;;:11;:25;31871:12;:10;:12::i;:::-;-1:-1:-1;;;;;31859:25:0;;;;;;;;;;;;;;;;;-1:-1:-1;31859:25:0;;;:34;;;;;;;;;;;:96;:38;:96::i;29079:175::-;29165:4;29182:42;29192:12;:10;:12::i;:::-;29206:9;29217:6;29182:9;:42::i;29317:151::-;-1:-1:-1;;;;;29433:18:0;;;29406:7;29433:18;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;29317:151::o;38139:284::-;24331:12;:10;:12::i;:::-;-1:-1:-1;;;;;24320:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;24320:23:0;;24312:68;;;;;-1:-1:-1;;;24312:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;38244:3:::1;::::0;:28:::1;::::0;;;;;38266:4:::1;38244:28;::::0;::::1;::::0;;;-1:-1:-1;;38244:3:0::1;::::0;::::1;-1:-1:-1::0;;;;;38244:3:0::1;::::0;:13:::1;::::0;:28;;;;;::::1;::::0;;;;;;;;:3;:28;::::1;;::::0;::::1;;;;::::0;::::1;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;::::0;::::1;;-1:-1:-1::0;38244:28:0;;-1:-1:-1;38287:16:0;;::::1;38283:133;;;38320:3;::::0;:25:::1;::::0;;-1:-1:-1;;;38320:25:0;;-1:-1:-1;;;;;38320:25:0;;::::1;;::::0;::::1;::::0;;;;;;;;;:3:::1;::::0;;::::1;::::0;;::::1;::::0;:12:::1;::::0;:25;;;;;::::1;::::0;;;;;;;;;-1:-1:-1;38320:3:0;:25;::::1;;::::0;::::1;;;;::::0;::::1;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;::::0;::::1;;-1:-1:-1::0;38283:133:0::1;::::0;-1:-1:-1;38283:133:0::1;;38378:3;::::0;:26:::1;::::0;;-1:-1:-1;;;38378:26:0;;-1:-1:-1;;;;;38378:26:0;;::::1;;::::0;::::1;::::0;;;;;;;;;:3:::1;::::0;;::::1;::::0;;::::1;::::0;:12:::1;::::0;:26;;;;;::::1;::::0;;;;;;;;;-1:-1:-1;38378:3:0;:26;::::1;;::::0;::::1;;;;::::0;::::1;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;::::0;::::1;;-1:-1:-1::0;;38283:133:0::1;24391:1;38139:284:::0;;:::o;25054:244::-;24331:12;:10;:12::i;:::-;-1:-1:-1;;;;;24320:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;24320:23:0;;24312:68;;;;;-1:-1:-1;;;24312:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;25143:22:0;::::1;25135:73;;;;-1:-1:-1::0;;;25135:73:0::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;25245:6;::::0;;25224:38:::1;::::0;-1:-1:-1;;;;;25224:38:0;;::::1;::::0;25245:6;::::1;::::0;25224:38:::1;::::0;::::1;25273:6;:17:::0;;-1:-1:-1;;25273:17:0::1;-1:-1:-1::0;;;;;25273:17:0;;;::::1;::::0;;;::::1;::::0;;25054:244::o;22639:106::-;22727:10;22639:106;:::o;34864:346::-;-1:-1:-1;;;;;34966:19:0;;34958:68;;;;-1:-1:-1;;;34958:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;35045:21:0;;35037:68;;;;-1:-1:-1;;;35037:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;35118:18:0;;;;;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;:36;;;35170:32;;;;;;;;;;;;;;;;;34864:346;;;:::o;32476:539::-;-1:-1:-1;;;;;32582:20:0;;32574:70;;;;-1:-1:-1;;;32574:70:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;32663:23:0;;32655:71;;;;-1:-1:-1;;;32655:71:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;32739:47;32760:6;32768:9;32779:6;32739:20;:47::i;:::-;32819:71;32841:6;32819:71;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;32819:17:0;;;;;;:9;:17;;;;;;;:71;:21;:71::i;:::-;-1:-1:-1;;;;;32799:17:0;;;;;;;:9;:17;;;;;;:91;;;;32924:20;;;;;;;:32;;32949:6;32924:24;:32::i;:::-;-1:-1:-1;;;;;32901:20:0;;;;;;;:9;:20;;;;;;;;;:55;;;;32972:35;;;;;;;32901:20;;32972:35;;;;;;;;;;;;;32476:539;;;:::o;8403:166::-;8489:7;8525:12;8517:6;;;;8509:29;;;;-1:-1:-1;;;8509:29:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;8556:5:0;;;8403:166::o;5576:179::-;5634:7;5666:5;;;5690:6;;;;5682:46;;;;;-1:-1:-1;;;5682:46:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;5746:1;5576:179;-1:-1:-1;;;5576:179:0:o;33297:378::-;-1:-1:-1;;;;;33381:21:0;;33373:65;;;;;-1:-1:-1;;;33373:65:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;33451:49;33480:1;33484:7;33493:6;33451:20;:49::i;:::-;33528:12;;:24;;33545:6;33528:16;:24::i;:::-;33513:12;:39;-1:-1:-1;;;;;33584:18:0;;;;;;:9;:18;;;;;;:30;;33607:6;33584:22;:30::i;:::-;-1:-1:-1;;;;;33563:18:0;;;;;;:9;:18;;;;;;;;:51;;;;33630:37;;;;;;;33563:18;;;;33630:37;;;;;;;;;;33297:378;;:::o;34008:418::-;-1:-1:-1;;;;;34092:21:0;;34084:67;;;;-1:-1:-1;;;34084:67:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;34164:49;34185:7;34202:1;34206:6;34164:20;:49::i;:::-;34247:68;34270:6;34247:68;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;34247:18:0;;;;;;:9;:18;;;;;;;:68;:22;:68::i;:::-;-1:-1:-1;;;;;34226:18:0;;;;;;:9;:18;;;;;:89;34341:12;;:24;;34358:6;34341:16;:24::i;:::-;34326:12;:39;34381:37;;;;;;;;34407:1;;-1:-1:-1;;;;;34381:37:0;;;;;;;;;;;;34008:418;;:::o;6038:158::-;6096:7;6129:1;6124;:6;;6116:49;;;;;-1:-1:-1;;;6116:49:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;6183:5:0;;;6038:158::o

ipfs://2a885356308d7d22179953a0e284d4f3a211e83c246d5755be4b9cec420df300